Flange bearing 3 holes LINK-BELT F3CL2E56N

LINK-BELT F3CL2E56N is a flange bearing 3 holes reference, within Bearing housings. Request a quote for F3CL2E56N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt 200 series 3-bolt flange bearing housing is a mounted bearing ready to be fixed to a flat surface, with the shaft passing through and the flange bolted at three points. It is used when a rotating shaft needs to be supported with simple alignment and quick access to the bearing. MR Accesorios Industriales supplies this line as an official brand for plants, workshops and process equipment in Buenos Aires, Argentina.

The designation of these housings is read in blocks. The letter F indicates the mounting flange; the first number, the number of fixing holes; the letters CL identify the housing series; the following number corresponds to the nominal shaft diameter; the letter E indicates the version with inserted bearing; and the final N distinguishes the type of inner ring fixing. That is why the examples F3CL2E36N, F3CL2E48N and F3CL2E56N share the structure and differ only in shaft size.

These housings appear in belt and screw conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines. In Argentina they are seen in food plants, cement plants, tanneries, meatpacking plants and mining facilities, where flange mounting solves shafts that cannot be supported on a pillow block. The three-bolt flange allows fixing to sheet metal, profiles or a bedplate with a stable orientation.

To choose correctly, verify the shaft diameter and the bolt hole spacing on the flange before requesting a quote. Mounting requires a clean, flat surface, tightening the three bolts in a cross pattern and aligning the shaft with the drive equipment. Lubrication of the insert is done through the lubrication channel in the housing; in dusty or humid environments, additional seals or covers should be evaluated. The internal clearance of the inserted bearing is not adjustable: it is defined by the manufacturer.

The Link-Belt 200 series is generally interchangeable with flange mounted bearings from other brands that respect the same shaft diameter and the same hole pattern. It is not enough for the shaft size to match: the center distance between fixing points, the outer diameter of the flange and the type of inner ring fixing must be compared. With this data, MR Accesorios Industriales will indicate the compatible alternative.

If you have the housing part number, the shaft diameter or a photo of the flange, send it via WhatsApp to MR Accesorios Industriales. We will quote the Link-Belt reference you need or the alternative that best suits your equipment, and we will respond promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.