LINK-BELT F3CL2E48N flange bearing 3 holes

LINK-BELT F3CL2E48N is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for F3CL2E48N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Link-Belt 3-bolt flange bracket is a mounted bearing ready to be fastened onto a flat surface, with the shaft passing through and the flange bolted at three points. It is used when a rotating shaft needs to be supported with simple alignment and quick access to the bearing. MR Accesorios Industriales sells this line for plants, workshops and process equipment in Buenos Aires, Argentina.

The designation of these brackets is read in blocks. The letter F indicates the mounting flange; the first number, the number of fastening holes; the letters CL identify the housing series; the number that follows corresponds to the nominal shaft diameter; the letter E indicates the version with an inserted bearing; and the final N distinguishes the type of inner ring fastening. That is why the examples F3CL2E36N, F3CL2E48N and F3CL2E56N share the same structure and differ only in shaft size.

These brackets appear in belt and screw conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines. In Argentina they are seen in food plants, cement plants, tanneries, meatpacking plants and mining facilities, where flange mounting solves shafts that cannot be supported on a pillow block. The 3-bolt flange allows fastening onto sheet metal, profiles or a machine bed with a stable orientation.

To choose correctly, check the shaft diameter and the bolt hole spacing on the flange before requesting a quote. Mounting requires a clean, flat surface, tightening the three bolts in a cross pattern and aligning the shaft with the drive equipment. The insert is lubricated through the housing lubrication channel; in dusty or humid environments, additional seals or covers should be considered. The internal clearance of the inserted bearing is not adjustable: it is set by the manufacturer.

The Link-Belt series is generally interchangeable with flange mounted bearings from other brands that match the same shaft diameter and the same hole pattern. Matching the shaft size is not enough: the distance between fastening centers, the flange outer diameter and the type of inner ring fastening must be compared. With that data, MR Accesorios Industriales tells you the compatible alternative.

If you have the bracket code, the shaft diameter or a photo of the flange, send it via WhatsApp to MR Accesorios Industriales. We will quote the Link-Belt reference you need or the alternative that best fits your equipment, and we will reply shortly.