Flange bearing 4 holes LINK-BELT F3CL2B19N*Δ■

LINK-BELT F3CL2B19N*Δ■ is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F3CL2B19N*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt CL series 4-bolt flange bearing is a mounted bearing with a square flange housing and mounting holes, designed to support rotating shafts on flat structures. It is used when the shaft runs perpendicular to the mounting surface and firm fastening with good load capacity is required. MR Accesorios Industriales carries this line as an official brand, with technical advice to choose the right size.

The CL series designation is read in blocks: the initial F indicates the 4-bolt flange housing, the number after CL corresponds to the nominal shaft diameter and the final letters identify the locking type and the sealing. That is why F3CL2B16N*Δ■ and F3CL2B28N*Δ■ share the same housing and differ only in shaft size. Send us the full code on WhatsApp and we will tell you the exact equivalent.

These housings appear in belt and roller conveyors, packaging lines, mixers, blowers, bucket elevators and process lines in food, chemical and aggregate plants. In the Argentine market they are widely requested as replacements on equipment that already has a 4-bolt flange and needs a mounted unit ready to install, without machining the structure.

To select correctly, take into account radial and axial load, rotation speed and the environment: if there is dust or water, a tighter seal is advisable, and if the shaft expands due to temperature, a unit with suitable internal clearance. During mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and check shaft alignment before lubricating and starting up.

Flange mounted units are interchanged between manufacturers by number of holes, center distance, shaft diameter and locking type, but housing dimensions do not always match. Always compare the flange drawing and the shaft diameter before replacing one unit with another. If you send us the original part number, we will tell you the compatible alternative.

MR Accesorios Industriales has more than 80 years in the trade and manufactures split plummer block housings, ANSI chains and pulleys, as well as distributing bearings and power transmission accessories. Send us the F3CL2B code shown on your equipment on WhatsApp, with a photo of the flange if you can, and we will send you a quote shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.