Hanger bearing LINK-BELT EHBS2E26E

LINK-BELT EHBS2E26E is a hanger bearing reference, within Bearing housings. Request a quote for EHBS2E26E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Link-Belt 200 Series hanger bearings are mounted units that support and guide the shaft of screw conveyors and other continuous-motion equipment. They are fastened to the structure by a top flange and house the bearing in a body that allows rotation with self-alignment. MR Accesorios Industriales supplies this line for process plants, mills and material handling in Buenos Aires, Argentina.

The designation of these hanger bearings is read in blocks. The letters EHBS identify the flanged hanger bearing family; the number that follows indicates the series and housing size, and the final characters define sealing or configuration variants. That is why references such as EHBS2E20E, EHBS2E26E and EHBS2E32E coexist: they share the 200 series and differ in the digit that sets the shaft and body size. To order the correct replacement, provide the complete code exactly as it appears on the tag or drawing.

In Argentine industry these hanger bearings appear in screw conveyors in food, cement, fertilizer and aggregate processing plants, where the central shaft needs an intermediate support point that does not block the material flow. They are also used in bucket elevators, mixers and continuous process equipment. The top flange is bolted to the trough cover or structure, and the body remains suspended within the flow, with the bearing protected from the conveyed product.

For proper selection, consider the shaft diameter and length, the radial and axial load the support must absorb, and the working environment: dust, moisture or frequent washdowns require tighter seals and a suitable lubrication regime. During installation, check alignment between supports to avoid loading the bearing, tighten the flange without deforming the body, and grease according to the type of service. Periodic lubrication and a seal in good condition extend the life of the assembly.

Among brands, 200 series hanger bearings are interchanged by shaft size and flange type, not by commercial code: always compare mounting dimensions, shaft diameter and sealing configuration before replacing a unit. If you need to replace existing equipment, MR Accesorios Industriales will indicate the compatible alternative within the Link-Belt line it supplies. Send us the complete EHBS code or the shaft dimensions via WhatsApp and we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.