LINK-BELT EHBS2E20E hanger bearing
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 200
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT EHBS2E20E is a reference of hanger bearing, within Bearing housings. Request a quote for EHBS2E20E via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
Link-Belt 200 series hanger bearings are mounted units that support and guide the shaft of screw conveyors and other continuous-motion equipment. They are fastened to the structure by a top flange and house the bearing in a body that allows rotation with self-alignment. MR Accesorios Industriales sells this line for process plants, mills and material handling in Buenos Aires, Argentina.
The designation of these hanger bearings is read in blocks. The letters EHBS identify the flanged hanger bearing family; the number that follows indicates the series and housing size, and the final characters define sealing or configuration variants. That is why references such as EHBS2E20E, EHBS2E26E and EHBS2E32E coexist: they share the 200 series and differ in the digit that sets the shaft size and body. To order the correct replacement, provide the complete code as it appears on the nameplate or drawing.
They are also used in bucket elevators, mixers and continuous process equipment. The top flange is bolted to the trough cover or structure, and the body remains suspended within the flow, with the bearing protected from the conveyed product.
To select correctly, consider the shaft diameter and length, the radial and axial load the support must absorb, and the working environment: dust, moisture or frequent washdowns require tighter seals and a suitable lubrication regime. During assembly, verify alignment between supports to avoid loading the bearing, tighten the flange without deforming the body, and grease according to the type of service. Periodic lubrication and a seal in good condition extend the life of the assembly.
Among brands, hanger bearings are interchanged by shaft size and flange type, not by commercial code: always compare mounting dimensions, shaft diameter and sealing configuration before replacing a unit. If you need to replace existing equipment, MR Accesorios Industriales will indicate the compatible alternative within the Link-Belt line it sells. Send us the complete EHBS code or the shaft dimensions via WhatsApp and we will quote you promptly.
Dimensions
- Bore
- 1 1/4 in
Frequently Asked Questions
- How do I identify the hanger bearing I need?
- Take the code stamped on the body or flange, for example EHBS2E20E, and provide it in full. If it is not legible, measure the shaft diameter, the distance between flange holes and the type of sealing. With that data we will indicate the equivalent reference.
- Can they be replaced by another brand?
- Yes, interchangeability is defined by mounting dimensions and shaft diameter, not by the manufacturer's code. Compare flange height, holes and sealing configuration. MR Accesorios Industriales advises you to find the compatible alternative within the line it sells.
- What maintenance does a hanger bearing require?
- Check lubrication according to the service, inspect that the seals are not damaged and verify alignment with neighboring supports. In dusty or humid environments, shorten the greasing intervals and check that the body has no play relative to the shaft.