LINK-BELT DKLFBM02E20SP flange bearing 3 holes

LINK-BELT DKLFBM02E20SP is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for DKLFBM02E20SP via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 3-bolt flange mounted bearing of the LINK-BELT Duralon series is a ready-to-mount unit that combines an insert bearing with a triangular flange housing. It is used to support rotating shafts in equipment where front mounting with three anchor points is required, such as conveyors, mixers and process machinery. MR Accesorios Industriales sells this line and advises you on choosing the right configuration for your application.

The Duralon series designation is read in blocks: the initial letters identify the housing type and the sealing system, while the numbers that follow indicate the shaft diameter and the unit size. In the example DKLFBM02E20SP, the code starts with the letters that define the 3-bolt flange and the insert, and ends with the suffix SP that distinguishes the mounting variant. To request a quote, send us the complete code exactly as it appears on your equipment or drawing.

These mounted bearings are chosen in food and beverage plants, water treatment, cement, mining and material handling. In Argentina they appear in belt conveyors, bucket elevators, agitators, blowers and packaging lines. The 3-bolt flange allows the unit to be fastened to a flat face of the frame and the shaft to be aligned accurately, which is key when the equipment runs with vibration or moderate loads.

To select correctly, check the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal defines the protection against dust, water and debris: in humid environments or with frequent washdowns, a tighter barrier is advisable. Mounting requires resting the flange on a clean, flat surface, tightening the three bolts evenly and verifying shaft alignment before lubricating and starting up.

As for equivalents, 3-bolt flange mounted bearings are available from several brands with their own nomenclature. Interchangeability depends on the flange dimensions, the shaft diameter and the insert locking type. If your equipment carries a LINK-BELT code, the most direct option is to request a quote for that same code; if not, with the main dimensions we can indicate the compatible alternative from our catalogue.

MR Accesorios Industriales sells the LINK-BELT line and manufactures split plummer block housings, ANSI roller chains and pulleys. If you need this 3-bolt flange mounted bearing, send us the code DKLFBM02E20SP or your equipment model on WhatsApp and we will quote it promptly.