LINK-BELT DKLFBM014SP flange bearing 3 holes

LINK-BELT DKLFBM014SP is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for DKLFBM014SP via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Duralon DKLFBM support is a 3-bolt flange mounted bearing that combines the mounting housing with a self-lubricating insert. It is used to support rotating shafts in equipment where cleanliness, corrosion resistance and dry running are a priority. MR Accesorios Industriales sells this LINK-BELT line in Buenos Aires, Argentina, and advises you on choosing the right size for your shaft and application.

The DKLFBM designation reads in blocks: the letters indicate the support type and its mounting configuration, and the final number identifies the shaft size for which it is built. In the examples DKLFBM013SP to DKLFBM019SP, the numeric section changes according to the diameter; DKLFBM220SP corresponds to a different size within the same series. The SP suffix distinguishes the sealing or finish variant. To order the replacement, send us the full code shown on the housing or on the equipment plate.

These supports are found in belt conveyors, bucket elevators, mixers, water treatment equipment and packaging lines. In food, chemical and beverage plants in Argentina they are chosen for their ability to run without continuous lubrication and for the insert's resistance to moisture and frequent washdowns. They also appear in fans, blowers and process machinery where access for greasing is limited or simply nonexistent.

To select the support, start from the shaft diameter and the radial load it will carry. Check that the 3-bolt flange matches the hole layout of your machine and that the insert allows the necessary alignment. Mounting is done on a flat, clean surface; tighten the bolts one by one and in a cross pattern so as not to deform the housing. If the equipment is exposed to dust or water, check the condition of the sealing before starting it up.

Mounted supports are available in several brands and equivalent lines. Interchangeability does not depend only on the diameter: center height, hole spacing, mounting type and sealing all change. That is why it is best to compare the full designation and the critical dimensions before replacing one unit with another. If you send us the original code and a photo of the housing, we will tell you the compatible alternative within the lines we sell.

MR Accesorios Industriales supplies Argentine industry from Buenos Aires, Argentina. If you need the Duralon DKLFBM support for equipment in operation, send us the code by WhatsApp and we will quote it promptly. We can also review the application together to confirm that the size and sealing variant are the right ones.