LINK-BELT B4M85L insert bearing

LINK-BELT B4M85L is a reference of insert bearing, within Bearings. Request a quote for B4M85L via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT B22400 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or hanger units. It is used in equipment where the shaft rotates on supports that can be disassembled without dismantling the transmission. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in bearings and power transmission components.

The B22400 series designation is read in blocks. In the series codes, the letter B identifies the family of split insert bearings, the number that follows indicates the shaft diameter in inches or millimeters depending on the variant, the M indicates the type of shaft locking and the final L corresponds to the sealing configuration. These inserts are mounted in housings of the corresponding series, which hold the bearing by its outer ring.

In Argentine industry, these bearings appear in belt conveyors, bucket elevators, mixers, mills and process equipment. They are also found in food, cement, mining and aggregate processing plants, where split housings allow the insert to be replaced without dismantling the shaft or the transmission. It is a common solution in machines that work with long shafts and several intermediate supports.

To select the insert, take into account the shaft diameter, the locking type and the sealing required by the environment. The final L usually indicates reinforced sealing, suitable for dust, moisture or frequent washdowns. Mounting is done on the split housing, with the insert aligned and the locking screws tightened to the recommended torque. Lubrication is applied through the housing channel and it is advisable to check axial play before starting up the equipment.

B22400 series inserts are interchangeable with other equivalent insert bearing lines, as long as the shaft diameter, the inner ring width and the locking type match. When requesting a quote, it is best to provide the full part number and, if possible, the shaft and housing dimensions. MR Accesorios Industriales will indicate the compatible alternative.

If you need to replace a LINK-BELT B22400 series insert, send the part number by WhatsApp to MR Accesorios Industriales. We will quote you promptly and advise you on mounting and lubrication.