Insert bearing LINK-BELT B4M100L

LINK-BELT B4M100L is a insert bearing reference, within Bearings. Request a quote for B4M100L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT B22400 series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or hanger units. It is used in equipment where the shaft rotates on supports that can be disassembled without removing the transmission. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in bearings and power transmission components.

The B22400 series designation is read in blocks. In the codes B4M80L, B4M85L, B4M90L and B4M100L, the letter B identifies the split insert family, the number that follows indicates the shaft diameter in inches or millimeters depending on the variant, the M indicates the type of shaft locking and the final L corresponds to the sealing configuration. These inserts are mounted in housings of the corresponding series, which hold the bearing by its outer ring.

In Argentine industry, these bearings appear in belt conveyors, bucket elevators, mixers, mills and process equipment. They are also found in food, cement, mining and aggregate processing plants, where split housings allow the insert to be replaced without disassembling the shaft or the transmission. It is a common solution in machines that run with long shafts and several intermediate supports.

To select the insert, take into account the shaft diameter, the locking type and the sealing required by the environment. The final L usually indicates reinforced sealing, suitable for dust, moisture or frequent washdowns. Mounting is done on the split housing, with the insert aligned and the locking screws tightened to the recommended torque. Lubrication is applied through the housing channel, and it is advisable to check the axial clearance before starting up the equipment.

B22400 series inserts are interchangeable with other equivalent insert bearing lines, as long as the shaft diameter, the inner ring width and the locking type match. When requesting a quote, it is best to provide the complete code and, if possible, the shaft and housing dimensions. MR Accesorios Industriales will indicate the compatible alternative if the exact reference is not available.

If you need to replace a LINK-BELT B22400 series insert, send the code by WhatsApp to MR Accesorios Industriales. We will quote you promptly and advise you on mounting and lubrication.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.