Y-bearing (insert bearing) INA VKE28-209-KTT-B-GA47/70

INA VKE28-209-KTT-B-GA47/70 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for VKE28-209-KTT-B-GA47/70 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-bearing (insert bearing) is a ball bearing with a spherical outer ring and a shaft locking system, designed to be housed in split plummer block or flanged housings. The INA VKE KTT series is used in equipment where the shaft rotates on simple supports and fast mounting and good sealing against dust and moisture are required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the correct part number.

The VKE KTT series designation is read in blocks: the letters VKE identify the insert family, and the number that follows — as in VKE28-209-KTT-B-GA47/70 — indicates the size and the shaft diameter it corresponds to. The KTT suffix defines the sealing type, the letter B indicates a design variant of the outer ring, and GA with its final numbers refers to the locking configuration and tolerances of the insert. Each combination of letters and numbers gives a unique part number that should be copied in full when requesting a quote.

These Y-bearings are mounted in split plummer block, pillow block or flanged housings, and appear in belt conveyors, sorting belts, elevators, mixers and process equipment. In Argentina they are seen in food plants, meat processing plants, aggregate plants, mills and packaging lines, where the environment has dust, moisture or frequent washdowns. The combination of a spherical outer ring and a split housing allows small shaft misalignments to be absorbed without requiring precision machining.

To select the insert, take into account the shaft diameter, the locking type — set screw, eccentric or adapter sleeve — and the sealing required by the environment. Lubrication must be the one specified for the working temperature, and mounting must be done with the shaft clean and free of burrs, tightening the locking evenly. Initial alignment of the housing and a moderate load at the moment of tightening prevent deformation and extend bearing life.

Insert bearings are available from different brands under their own nomenclatures, and interchangeability depends on the shaft diameter, outer dimensions and locking type matching. It is not enough for the part number to be similar: dimensions and sealing configuration must be verified. If you have the original part number or the one from the equipment, send it in full and at MR Accesorios Industriales we will cross-reference it with the available INA line.

If you need to replace a VKE KTT insert, send the full part number — for example VKE28-209-KTT-B-GA47/70 — or the shaft and housing dimensions by WhatsApp. We'll quote you shortly and help you confirm that the chosen variant is the correct one for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.