Timing belt Gates 3200-MXL-019

GATES 3200-MXL-019 is a reference of timing belt, within Power transmission. Request a quote for 3200-MXL-019 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The MXL timing belt is a power transmission element with teeth that mesh with toothed pulleys, designed to drive shafts with synchronism and without slipping. It is used in equipment where the transmission ratio must remain exact, such as instruments, printers, CNC machines and positioning mechanisms. MR Accesorios Industriales sells this Gates line in Buenos Aires, Argentina, and quotes it via WhatsApp with the full part number.

The designation of these MXL belts is read in three blocks: the first indicates the pitch length in hundredths of an inch, the second is the MXL profile and the third is the width in hundredths of an inch. That is why 288-MXL-012, 288-MXL-019 and 288-MXL-025 share length and profile, and change only in width. Likewise, 296-MXL-012 and 320-MXL-019 are different lengths of the same profile. With those three data you identify the belt unambiguously.

This profile is used in light drives that need synchronism: print heads, plotters, measuring machines, laboratory equipment, automation with coordinated axes and feed mechanisms in machine tools. In Argentine industry it appears in maintenance of CNC equipment, in packaging lines and in special machines where replacing a belt with another of different pitch ruins synchronization. It is a fine-pitch belt, suitable for small pulleys and tight transmission ratios.

To choose well, check the pitch, length and width against the pulley and the available space. The MXL profile requires pulleys of the same pitch; mixing profiles wears teeth and pulley. Check pulley alignment and tension: a timing belt works with little tension compared to a V-belt, but if it is loose it jumps teeth. Keep pulleys clean and free of burrs. If the original equipment uses this profile, respect the width of the replaced belt so as not to lose transmission capacity.

Timing belts are identified by pitch, length and width, and different brands use equivalent nomenclatures for the same profile. If you bring a belt without a part number or with another manufacturer's designation, with those three measurements the equivalent can be located. At MR Accesorios Industriales we indicate the compatible alternative when the original part number does not match the catalog designation, always based on the actual measurements of the part.

If you need an MXL belt for your equipment, send the full part number via WhatsApp to MR Accesorios Industriales. With 288-MXL-012, 296-MXL-019 or whatever appears on your machine, we quote it shortly. If the belt has no identification, send the measured pitch, length and width and we will guide you to find the corresponding reference.