Timing belt Gates 172-L-100

GATES 172-L-100 is a reference of timing belt, within Power transmission. Request a quote for 172-L-100 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Gates L series timing belt is a power transmission element with teeth that mesh with toothed pulleys, allowing drive without slipping and maintaining a constant transmission ratio. It is used in equipment where synchronization is critical: from machine tools and compressors to pumps and conveyors. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, with more than 80 years of experience in the industry.

The designation of these belts combines three data points: the pitch length in tenths of an inch, the letter identifying the pitch, and the width in hundredths of an inch. For example, 124-L-050 indicates 12.4 inches long, L pitch, and 0.50 inches wide. Likewise, 135-L-100 is 13.5 inches long and 1.00 inch wide. L series part numbers are always read with that logic, so the number and suffixes already define the belt.

L series timing belts are found in the food, textile, printing, and metalworking industries, among others. They are seen in drives for industrial sewing machines, air compressors, vacuum pumps, mixers, small milling machines, and packaging equipment. In Argentina, many workshops and production plants choose them for their ability to maintain synchronization without slipping, even during loaded starts.

To select the correct belt, you must verify the pitch, the number of teeth on the pulleys, the pitch length, and the width. Installation requires aligning the pulleys and tensioning just right: excessive tension wears the teeth and bearings, and low tension causes skipping. It is also advisable to check the condition of the pulleys and keep the drive clean and free of lubrication on the belt.

If you need to replace a belt from another brand, with the original part number we can identify the Gates equivalent. Interchangeability is based on pitch, pitch length, and width: if those three values match, the belt is compatible. Send us the part number or measurement and we'll quote the corresponding option.

To request a quote for your Gates L series timing belt, send the complete part number via WhatsApp to MR Accesorios Industriales. If you have doubts about the designation or need a specific size, write to us and we'll advise you so you get the exact reference. We are in Buenos Aires, Argentina, and we handle inquiries from all over the country.