Timing belt Gates 100-XL-025

GATES 100-XL-025 is a reference of timing belt, within Power transmission. Request a quote for 100-XL-025 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The XL timing belt is a toothed belt with a trapezoidal profile that transmits motion between toothed pulleys without slipping, maintaining a constant transmission ratio. It is used when synchronism and positioning accuracy are required, not just drive. MR Accesorios Industriales sells this Gates line in Buenos Aires, Argentina, and quotes it by WhatsApp with the exact part number you need.

The designation of these belts is read in three parts: the initial number indicates the pitch length in tenths of an inch, the letters XL identify the pitch and the toothed profile, and the final number expresses the width in hundredths of an inch. For example, 46-XL-025 is a belt with XL pitch, 46 tenths of an inch long and 0.25 inches wide; 58-XL-031 shares the pitch but has a different length, with 0.31 inches of width. This way you can order the exact size shown on your machine.

These belts appear in transmissions where synchronism is critical: printers and plotters, laboratory equipment, industrial sewing machines, small drive shafts, automation systems and technical appliances. In the Argentine market they are seen in maintenance workshops, packaging plants, the printing industry and imported equipment that requires belt replacement without changing the pulley. The XL profile covers low powers and moderate speeds, with a range of lengths and widths that allows adjusting the transmission without redesigning.

To select correctly, take into account the pitch and the number of teeth on the pulleys, the pitch length your equipment needs and the width that fits in the groove. Check that the pulleys are aligned and that the teeth are not worn, because a worn pulley shortens the life of any new belt. Tension is adjusted according to the equipment manual: too little tension causes tooth jumping, too much loads the bearings. Keep the belt clean, free of oil and grease, and check wear periodically.

When replacing, compare the complete part number of the old belt with the new one. Timing belts are identified by pitch, length and width, and different brands may use equivalent nomenclatures for the same profile. If you have the part number of another brand or a belt without a legible identification, write to us on WhatsApp with a photo and the measurements: we will tell you the equivalent compatible with your equipment.

MR Accesorios Industriales sells the Gates line and quotes the XL belt you need. Send us the complete part number by WhatsApp, for example 50-XL-037, or the measurements of your current belt, and we will reply shortly with the quote. If your equipment requires a different width or length variant, we also handle it with the same criteria.