Adapter sleeve FAG H2320

FAG H2320 is a adapter sleeve reference, within Bushings and sleeves. Request a quote for H2320 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The FAG adapter sleeve H series is a mounting component used to secure bearings with a tapered bore onto cylindrical shafts. It is combined with a lock nut and a lock washer to achieve precise and removable fastening. It is a key part in power transmission, as it guarantees the correct position of the bearing and facilitates maintenance tasks. MR Accesorios Industriales offers this line as part of its range of mounting components.

The H series designation is read with the letter H followed by a number that indicates the shaft diameter for which the sleeve is intended. For example, H203 corresponds to a 17 mm shaft, H204 to 20 mm, H205 to 25 mm, and so on. Any suffixes that may appear after the number provide information about length or thread variants, but in all cases the complete part number identifies the exact part. To select the correct sleeve, you must start from the shaft diameter and the bearing to be mounted.

Adapter sleeves are used in a wide variety of industrial equipment in Argentina: from machine tools and conveyors to pumps, fans and gearboxes. They are common in food, textile and cement plants and in the metalworking sector, where bearings with a tapered bore need to be mounted quickly and safely. They are also used in applications where the shaft does not have a shoulder or step to support the bearing, since the sleeve allows it to be fastened by interference.

For correct mounting, verify that the shaft has the appropriate tolerance and that the surface is clean and free of burrs. The sleeve is inserted into the tapered bore of the bearing and tightened with the corresponding lock nut, which compresses the sleeve against the shaft. It is essential to respect the recommended tightening torque and to use the lock washer to prevent the nut from loosening. Lubrication of the sleeve and bearing must follow the manufacturer's instructions to ensure long service life.

When replacing a sleeve, it is important to consider interchangeability between brands. Although each manufacturer has its own designations, H series sleeves generally follow standardized dimensions, which makes it possible to find equivalents in other brands. However, it is always advisable to verify the exact dimensions and mounting conditions before replacing a part. At MR Accesorios Industriales we can advise you to identify the correct reference for your equipment.

If you need a FAG adapter sleeve H series, write to us on WhatsApp with the part number or model you are looking for. We will quote you shortly and help you confirm that the part is the correct one for your application. MR Accesorios Industriales has more than 80 years of experience in the industry and a technical team ready to answer your questions.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.