FAG H2319 adapter sleeve

FAG H2319 is a reference of adapter sleeve, within Bushings and sleeves. Request a quote for H2319 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The FAG H series adapter sleeve is a mounting component used to secure bearings with a tapered bore onto cylindrical shafts. It is combined with a lock nut and a lock washer to achieve precise, removable fastening. It is a key part in power transmission, as it guarantees the correct position of the bearing and simplifies maintenance tasks. MR Accesorios Industriales sells this line as part of its range of mounting components.

The H series designation is read with the letter H followed by a number that indicates the shaft diameter for which the sleeve is intended. For example, H203 is mounted on a 14 mm shaft with a bearing with a 17 mm bore, H204 on a 17 mm shaft with a 20 mm bearing, H205 on a 20 mm shaft with a 25 mm bearing, and so on. Any suffixes that may appear after the number provide information about length or thread variants, but in all cases the complete part number identifies the exact part. To select the correct sleeve, you must start from the shaft diameter and the bearing to be mounted.

Adapter sleeves are used in a wide variety of industrial equipment in Argentina: from machine tools and conveyors to pumps, fans and gearboxes. They are common in food, textile and cement plants and in the metalworking sector, where bearings with a tapered bore need to be mounted quickly and safely. They are also used in applications where the shaft has no shoulder or step to support the bearing, since the sleeve allows it to be fastened by interference.

For correct mounting, check that the shaft has the right tolerance and that the surface is clean and free of burrs. The sleeve is inserted into the tapered bore of the bearing and tightened with the corresponding lock nut, which compresses the sleeve against the shaft. It is essential to respect the recommended tightening torque and to use the lock washer to prevent the nut from loosening. Lubrication of the sleeve and the bearing must follow the manufacturer's instructions to ensure long service life.

When replacing a sleeve, it is important to consider interchangeability between brands. Although each manufacturer has its own designations, H series sleeves generally follow standardized dimensions, which makes it possible to find equivalents from other brands. However, it is always advisable to verify the exact measurements and mounting conditions before replacing a part. At MR Accesorios Industriales we can advise you to identify the right reference for your equipment.

If you need a FAG H series adapter sleeve, write to us on WhatsApp with the part number or model you are looking for. We will send you a quote shortly and help you confirm that the part is the right one for your application. MR Accesorios Industriales has a technical team ready to answer your questions.