FAG 61807-2RSR deep groove ball bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG 61807-2RSR
- 618Series
- Deep groove ball bearings, 618 series. For the same bore, each series has a different outside diameter and width.
- 07Bore
- 35 mm bore: 07 × 5.
- 2RSRSuffix
- FAG suffix: it defines the variant (sealing, cage, internal clearance or other features).
61807 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG 61807-2RSR bearing has a 35 mm bore, a 47 mm outside diameter and a 7 mm width (35 x 47 x 7 mm).
FAG 61807-2RSR is a reference of deep groove ball bearing, within Bearings. Request a quote for 61807-2RSR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The deep groove ball bearing is the most widely used component for supporting radial and moderate axial loads in rotating equipment. The FAG 2RSR series incorporates contact seals on both sides that retain lubricant and block the entry of dust and moisture. MR Accesorios Industriales supplies this line for plants, workshops and maintenance operations in Buenos Aires, Argentina.
The designation of these bearings combines the series number with the suffix 2RSR. The numeric code, as in 6003-2RSR or 6014-2RSR, identifies the series and size; the higher the number, the larger the bore diameter and load capacity. The suffix 2RSR indicates sealing on both sides, with a contact seal that protects the raceway and the lubricant. This nomenclature makes it easy to recognize the type of closure and order the correct replacement.
They are used in electric motors, centrifugal pumps, fans, conveyors, machine tools and transmission equipment. In Argentine industry they appear in packaging lines, mills, food plants and pumping systems. Their double sealing makes them suitable for environments with dust, chips or moderate moisture, where an open bearing would require frequent lubrication.
To select the bearing, check the shaft diameter, the type of load and the environmental conditions. The 2RSR sealing is suitable when there is contamination; if the requirement is high speed and low friction, consider a variant with less contact. During mounting, correctly align the shaft and the housing, avoid direct blows on the seals and use suitable extraction and insertion tools. The lubrication is retained from the factory; no addition is required.
Deep groove ball bearings with 2RSR sealing are interchangeable between manufacturers that maintain standardized dimensions. When replacing, compare the complete code, the dimensions and the type of sealing. If the original equipment carries a different designation, the numeric code and the closure suffix are usually sufficient to identify an equivalent. If in doubt, consult the technical department.
To request a quote for the FAG 2RSR series bearing you need, send the complete code by WhatsApp to MR Accesorios Industriales. With the model and quantity, the team responds promptly. You can also inquire about other sealing variants or bearings from different brands and series.
Dimensions
Boundary dimensions of the basic designation 61807 per ISO 15: 35 x 47 x 7 mm (d x D x B).
- Bore
- 35mm
- Outside diameter (D)
- 47mm
- Width (B)
- 7mm
Same size in SKF and other brands
Pages from other brands with the basic designation 61807: 35 x 47 x 7 mm (d x D x B) per ISO 15.
- Looking for the SKF 61807? We also quote:61807-2RZ61807-2RS161807
- RKB61807
- TIMKEN61807
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG 61807-2RSR bearing?
- The FAG 61807-2RSR bearing has a 35 mm bore, a 47 mm outside diameter and a 7 mm width (35 x 47 x 7 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 61807.
- What does the 2RSR suffix mean on a FAG bearing?
- It indicates that the bearing has contact seals on both sides. These seals retain the lubricant and prevent the entry of contaminants such as dust or moisture, extending service life in demanding environments.
- How do I request a quote for a 2RSR bearing?
- Write by WhatsApp to MR Accesorios Industriales with the complete bearing code, for example 6003-2RSR, and the quantity you need. The team responds promptly with the information to proceed.
- Are 2RSR bearings interchangeable between brands?
- Yes, if they share standardized dimensions and the type of sealing. When replacing, check the numeric code and the closure suffix. If you have doubts, consult us by WhatsApp and we will help you identify the equivalent.