Pillow block bearing DODGE P2B-SCU-30M

DODGE P2B-SCU-30M is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCU-30M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCU series pillow block with insert bearing is a mounted assembly that combines a split cast iron housing with a ball insert bearing, ready to bolt to the structure. It is used to guide and support rotating shafts in transmission, conveying and process equipment, where a robust unit with simple mounting is needed. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with technical advice to choose the right configuration.

The SCU series designation is read in blocks: the letter P indicates pillow block, the number that follows defines the size or shaft diameter, and the suffix B indicates the split housing variant. The letters SCU identify the family of insert bearing with set screws, and the final M corresponds to standard sealing. For example, P2B-SCU-17M, P2B-SCU-30M and P2B-SCU-75M share the same logic: the middle number changes according to the shaft. Knowing this structure lets you order the correct part number without ambiguity.

These pillow blocks are seen in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and packaging lines. In the Argentine industrial environment they appear in food plants, cement plants, tanneries, water treatment plants and metalworking shops. The cast iron housing withstands dust, humidity and moderate loads, and the ball insert accommodates slight misalignment, which simplifies mounting on welded or folded sheet metal structures.

To select well, take into account the shaft diameter, the type of load (radial, axial or combined) and the ambient conditions. The M sealing protects against contaminants and retains lubrication; if there is frequent washdown or abrasive dust, additional seals or external protection should be evaluated. Mounting requires seating the base on a flat, rigid surface, aligning the shaft with the pillow block and tightening the insert set screws onto the shaft, respecting the recommended torque. Proper lubrication and careful alignment extend the service life of the assembly.

As for equivalents, pillow blocks with insert bearings are interchangeable between brands by shaft number, housing configuration and insert locking type. It is not enough for the diameter to match: the base hole spacing, the center height and the locking system must be verified. If the original part number is not available, it can be replaced by a unit with equivalent performance. MR Accesorios Industriales will indicate the compatible alternative so the equipment keeps running without surprises.

If you need to replace a DODGE SCU series pillow block or look for an alternative for your application, send the part number or model via WhatsApp to MR Accesorios Industriales. With the shaft and equipment data, we will quote the option that best suits you and advise you on mounting. More than 80 years of experience in industrial distribution in Buenos Aires, Argentina, back every recommendation.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.