Pillow block bearing DODGE P2B-SCU-17M-NL

DODGE P2B-SCU-17M-NL is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCU-17M-NL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SCU series Y-bearing pillow block is a mounted bearing: the cast iron housing and the ball insert come assembled as a single unit, ready to bolt onto a flat base. It is used to guide shafts in equipment where alignment and sealing are already solved at the factory, and it simplifies mounting compared with a loose bearing and a separate housing. MR Accesorios Industriales supplies this Dodge line in Buenos Aires, Argentina.

The SCU series designation is read in blocks. The initial P indicates the pillow block; the number that follows defines the housing size; B corresponds to the split or two-piece housing; SCU identifies the ball insert series; the number before the M indicates the shaft diameter, and M is the metric thread of the locking device. NL closes the reference and indicates the insert sealing type. Thus, P2B-SCU-17M-NL, P2B-SCU-30M-NL and P2B-SCU-75M-NL are the same family in different shaft sizes.

These pillow blocks appear in belt and roller conveyors, packaging lines, mixers, blowers, exhaust fans, bucket elevators and process lines in food, chemical and aggregate plants. In Argentina they are widely seen in material handling equipment and in machines working with long shafts and moderate loads, where a compact unit is sought, easy to replace and with good protection against dust and ambient humidity.

To choose well, take into account the shaft diameter, the type of load (radial, axial or combined) and the ambient conditions. The insert sealing defines how much contamination the bearing tolerates: in areas with dust or washdown, the more closed variant is advisable. Internal clearance and lubrication are already defined by the manufacturer; during mounting, seat the housing on a rigid, aligned base, tighten the insert locking screws evenly and check that the shaft turns freely before starting the machine.

Mounted pillow blocks are interchangeable between brands by shaft number and housing type, but the center height, hole spacing and locking system do not always match. Before replacing a unit, compare those dimensions and the shaft diameter. If the assembly does not match, an equivalent pillow block or an alternative from another line can be evaluated. Send us the part number or the model you need via WhatsApp and at MR Accesorios Industriales we will quote it or indicate the compatible alternative shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.