Pillow block bearing DODGE P2B-SCMEZ-111-SHCR

DODGE P2B-SCMEZ-111-SHCR is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCMEZ-111-SHCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCMEZ series pillow block with insert bearing is a mounted unit that combines a ball bearing unit with a split or one-piece housing, ready to bolt onto a flat surface. It is used to guide and support rotating shafts in power transmission equipment, conveyors and machinery in general. MR Accesorios Industriales supplies this line as an official brand and advises you on choosing the correct configuration for your application.

The SCMEZ series designation is read in blocks: the P2B prefix indicates the pillow block type with insert bearing; SCMEZ identifies the insert series, with sealing and construction features specific to the line; the three-digit number that follows — as in P2B-SCMEZ-111-SHCR — indicates the shaft diameter for which the insert bore is formed; and the SHCR suffix distinguishes the housing and locking variant. Each combination of letters and numbers defines a complete unit, not a loose bearing.

These pillow blocks are seen in belt and roller conveyors, mixers, mills, bucket elevators, packaging lines and process equipment in food, chemical and aggregate plants. In Argentina they are common in agriculture and in manufacturing industry, where a robust support that tolerates slight misalignment and combined loads is required. The SCMEZ series, due to its construction, adapts to installations where the shaft must be supported on a rigid base accessible for maintenance.

To select the pillow block, start with the shaft diameter and the type of load: predominantly radial or with an axial component. Check the insert sealing system, because it defines protection against dust, water and frequent washdowns. During mounting, align the base and tighten the mounting bolts evenly; poor alignment shortens bearing life. Lubrication must follow the manufacturer's recommendation for the application, and internal clearance is checked with the insert already seated in the housing.

As for equivalents, insert bearing pillow blocks are interchangeable between brands by shaft number, housing type and sealing configuration, not by the complete part number. If you need to replace a DODGE SCMEZ, compare the critical dimensions — center height, hole spacing and shaft diameter — and consult us: we will indicate the compatible alternative or, if none exists, we will manufacture it to measure. Do not invent cross-reference numbers without verifying these dimensions.

To quote your DODGE SCMEZ series pillow block, send us the complete part number shown on the part or on the drawing on WhatsApp, for example P2B-SCMEZ-111-SHCR. With that data we will send you the quote and confirm the available configuration. If the part number does not appear, write to us anyway: at MR Accesorios Industriales we help you identify it and find the solution your equipment needs.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.