Pillow block bearing DODGE P2B-SCMEZ-111-SH

DODGE P2B-SCMEZ-111-SH is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCMEZ-111-SH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The SCMEZ series pillow block with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, already aligned and ready to bolt onto a base. It is used to guide and support rotating shafts in equipment where a compact, self-aligning unit that is easy to replace is required. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The designation is read in blocks. The letter P indicates a pillow block; the number that follows, as in P2B-SCMEZ-111-SH, refers to the housing size and the number of mounting holes. The SCMEZ block identifies the insert series and its sealing system, and the final number indicates the shaft diameter for which the bearing bore is machined. The SH suffix distinguishes the housing and locking variant. With that data you can order the exact unit.

These pillow blocks appear in belt conveyors, bucket elevators, mixers, screens, blowers and packaging lines. In the Argentine market they are found in food plants, cement plants, tanneries, aggregate processing and agro-industrial facilities, where the environment has dust, moisture or frequent washdowns. The cast iron housing absorbs the shaft loads and the ball insert allows rotation at moderate speed with simple maintenance: periodic greasing and visual inspection of the seal.

To choose correctly, take into account the shaft diameter, the expected radial and axial load, and the type of sealing the environment requires. In areas with water or particles, a tighter seal and relubrication are advisable; in clean applications standard sealing is enough. During mounting, rest the housing on a flat, rigid surface, tighten the mounting bolts without deforming the base, and check shaft alignment with a straightedge or dial indicator. Poor alignment shortens insert life more than any other factor.

Insert bearing pillow block series are interchangeable between manufacturers by shaft diameter and housing type, but the center height, hole spacing and insert locking system vary from one brand to another. Therefore, before replacing a unit, compare those dimensions and the inner ring locking method. If space is limited or the original housing is no longer available, an alternative from the same family with the same critical dimensions can be evaluated.

If you need this pillow block, send the complete part number on WhatsApp, for example P2B-SCMEZ-111-SH, or the reference shown on the equipment nameplate. At MR Accesorios Industriales we will quote it and, if you are looking for a variant that is not listed, write to us with the model and we will indicate the compatible alternative. We also manufacture split plummer block housings and custom parts for special cases.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.