Pillow block bearing DODGE P2B-SCEZ-104-SHSS

DODGE P2B-SCEZ-104-SHSS is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-SCEZ-104-SHSS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCEZ SHSS pillow block with insert bearing is an assembled unit that combines a cast iron housing with a ball insert bearing, ready to mount on a frame or structure. It is used to support transmission shafts in equipment where rigidity, simple alignment and protection against dust and moisture are required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you on choosing the right size.

The designation of these housings is read in blocks. The prefix P2B indicates a two-bolt pillow block; SCEZ identifies the housing family and the insert type with its sealing system; the number that follows, as in P2B-SCEZ-012-SHSS or P2B-SCEZ-107-SHSS, corresponds to the shaft diameter in inches according to the series table; and the suffix SHSS defines the sealing and locking variant of the insert. With those three data points — housing type, shaft size and suffix — the complete unit is identified.

These housings appear in belt conveyors, bucket elevators, mixers, mills, screens and packaging lines. In the Argentine market they are found in food plants, cement plants, meat processing plants, tanneries and aggregate processing facilities, where the shaft rotates at moderate speeds and the environment has dust, water or process residues. The cast iron housing absorbs the shaft loads and the insert allows small misalignments without forcing the bearing.

To select the housing, start from the shaft diameter and the type of load: predominantly radial in horizontal applications, with a limited axial component. Check the sealing according to the environment: the suffixes in the series define the protection against contaminants. During mounting, rest the housing on a flat, clean surface, tighten the mounting bolts without deforming the base and verify shaft alignment before tensioning the drive. Lubricate the insert according to the duty cycle and check the radial clearance periodically.

Interchangeability between mounted housing brands is established by the combination of shaft diameter, housing type and insert configuration, not by the commercial part number. A two-bolt pillow block with a ball insert and equivalent sealing can replace one of a different brand if those variables and the mounting dimensions match. To find the compatible alternative, the most practical approach is to send the complete part number or the shaft size and a photo of the nameplate.

If you need to replace a housing from this series, send the part number — for example P2B-SCEZ-104-SHSS — or the shaft size by WhatsApp to MR Accesorios Industriales. We will quote the reference and, if you are looking for a variant that is not listed, we will point you to the compatible alternative in the line. We can also review the sealing and lubrication together so the unit lasts in your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.