DODGE P2B-GTEZ-200-SHCR pillow block bearing

DODGE P2B-GTEZ-200-SHCR is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-GTEZ-200-SHCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The GTEZ series Y-bearing unit is a pillow block assembly: the cast iron housing and ball bearing come mounted and aligned from the factory, ready to be fixed to the structure. It is used to support transmission shafts in equipment that requires rigidity, self-alignment and sealing that withstands dust, water or washdown. DODGE is a brand MR Accesorios Industriales sells in Buenos Aires, Argentina.

The designation is read in blocks. The P2B prefix indicates a two-bolt split pillow block; GTEZ identifies the housing family with insert ball bearing and reinforced sealing; the number that follows is the shaft diameter code, which in this series varies according to the code; and the SHCR suffix defines the insert and sealing variant. With the complete code, the exact part can be ordered.

These units appear in belt and roller conveyors, packaging lines, mixers, blowers, screens, bucket elevators and washing lines. In the Argentine market they are seen in food, cement, aggregates, water treatment, chemical and food plants, where a humid or particle-laden environment requires a closed support that is easy to relubricate. They are also used to replace already installed pillow blocks when an assembled unit is sought rather than a loose bearing.

To choose well, take into account the shaft diameter, the expected radial and axial load, and the type of contaminant in the environment. The SHCR sealing is designed for environments with dust or moisture; if there is pressure washing, additional protection should be evaluated. During mounting, rest the base on a flat, rigid surface, tighten the bolts without forcing the housing and check shaft alignment before start-up. The self-alignment of the insert absorbs minor misalignments, but does not replace good alignment.

Interchangeability between brands is resolved by mounting dimensions: bolt center distance, height to shaft center, shaft diameter and type of fixing. A unit from another brand with the same dimensions can replace the GTEZ, but the sealing and insert locking system must also be compared. If the code does not match, the alternative is defined by those dimensions and not by the trade name. Send the code or dimensions by WhatsApp to MR Accesorios Industriales and we will indicate the compatible option.