Pillow block bearing DODGE P2B-DLH-35M-E

DODGE P2B-DLH-35M-E is a pillow block bearing reference, within Bearing housings. Request a quote for P2B-DLH-35M-E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE D-Lok series Y-bearing pillow block with insert bearing is a mounted pillow block unit that combines a cast iron housing with a self-aligning ball bearing and an eccentric collar locking system. It is used to support rotating shafts in conveyors, fans, mixers and power transmission equipment, where light misalignments must be absorbed and mounting simplified. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina.

The series designation is read in blocks: P indicates pillow block, 2B the two-bolt housing type, DLH corresponds to the D-Lok series with specific lubrication and sealing, and the number that follows —25M, 30M, 35M, 45M, 50M, 55M, 60M— identifies the shaft size in millimeters. The final letter E indicates the sealing variant. Thus, a P2B-DLH-30M-E is a two-bolt pillow block for a 30 mm shaft, with a D-Lok insert bearing and E-type seal.

These pillow blocks are chosen in food and beverage plants, cement plants, steel mills, paper mills and in aggregate or grain conveying lines. In Argentina they appear in bucket elevators, conveyor belts, vibrating screens, mills and water treatment equipment. The cast iron housing with flat base allows mounting on steel structures or concrete foundations, and the insert bearing with eccentric collar makes locking to the shaft easy without additional machining.

To select the pillow block, start from the shaft diameter you need and the type of load: predominantly radial in conveying applications. Check the alignment between pillow blocks and the lubrication: the D-Lok series comes factory-lubricated, but it is advisable to check the condition of the E seal if there is dust, water or frequent washdowns. Mounting is done with the eccentric collar turned in the direction of shaft rotation and tightened with the set screw; poor alignment accelerates insert wear.

As for interchangeability, pillow blocks with insert bearings from different brands usually share base dimensions and shaft height within the same size. If you need to replace a DODGE D-Lok, the most practical approach is to compare the shaft diameter, the base hole spacing and the center height. With that information, at MR Accesorios Industriales we will indicate the compatible alternative or the in-house manufacturing option if the pillow block is special.

MR Accesorios Industriales has more than 80 years in the industry and supplies the DODGE brand in Buenos Aires, Argentina. If you already have the pillow block code or the equipment model, send it via WhatsApp along with a photo of the nameplate or the assembly and we will quote it promptly. We can also advise you if you need to change size or evaluate an in-house manufactured split plummer block housing.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.