DODGE P2B-DLH-25M-E pillow block bearing

DODGE P2B-DLH-25M-E is a reference of pillow block bearing, within Bearing housings. Request a quote for P2B-DLH-25M-E via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE D-Lok series Y-bearing pillow block is a foot-mounted assembly that combines a cast iron housing with a self-aligning ball bearing and an eccentric collar locking system. It is used to support rotating shafts in conveyors, fans, mixers and transmission equipment, where slight misalignments must be absorbed and mounting simplified. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The series designation is read in blocks: P indicates pillow block, 2B the two-bolt housing type, DLH corresponds to the D-Lok series with specific lubrication and sealing, and the number that follows identifies the shaft size in millimeters. The final letter E indicates the sealing variant. Thus, a P2B-DLH-30M-E is a two-bolt pillow block for a 30 mm shaft, with a D-Lok insert bearing and E-type seal.

These pillow blocks are chosen in food and beverage plants, cement plants, steel mills, paper mills and in aggregate or grain conveying lines. In Argentina they appear in bucket elevators, belt conveyors, screens, mills and water treatment equipment. The cast iron housing with a flat base allows them to be mounted on steel structures or concrete foundations, and the insert bearing with eccentric collar makes fixing to the shaft easy without additional machining.

To select the pillow block, start from the shaft diameter you need and the type of load: predominantly radial in conveying applications. Check the alignment between pillow blocks and the lubrication: the D-Lok series comes lubricated from the factory, but it is advisable to check the condition of the E seal if there is dust, water or frequent washdowns. Mounting is done with the eccentric collar turned in the direction of shaft rotation and tightened with the set screw; poor alignment accelerates wear of the insert.

As for interchangeability, pillow blocks with insert bearings from different brands usually share base dimensions and shaft height within the same size. If you need to replace a DODGE D-Lok, the most practical approach is to compare the shaft diameter, the distance between base holes and the height to center. With that data, at MR Accesorios Industriales we will indicate the compatible alternative.

MR Accesorios Industriales sells the DODGE brand in Buenos Aires, Argentina. If you already have the pillow block part number or the equipment model, send it via WhatsApp along with a photo of the nameplate or the assembly and we will quote it promptly. We can also advise you if you need to change the size or evaluate a split plummer block housing.