DODGE INS-SXRH-200L-E insert bearing

DODGE INS-SXRH-200L-E is a reference of insert bearing, within Bearings. Request a quote for INS-SXRH-200L-E via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SXRH-E series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used when the insert needs to be replaced without changing the housing, or to assemble equipment with a split housing. Its design allows the bearing to be aligned and locked onto the shaft easily, and it is a common solution in low and medium speed drives. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The SXRH-E designation identifies the insert series of the Dodge Mounted Ball Bearings line. The complete part number, such as INS-SXRH-200L-E, combines the insert prefix, the series, the size and a suffix that indicates the sealing and locking configuration. In practice, the middle number (200 in the example) refers to the shaft diameter, while the final letters distinguish sealing variants, such as the labyrinth or the contact seal. To choose the correct replacement, it is best to compare the complete part number and not just the series.

These inserts are used in conveying equipment, mills, mixers, belts and elevators, and generally in any machine with shafts supported on split plummer block housings. In Argentina they are common in food, cement, ceramic and agro-industrial plants, where maintenance is done with the equipment stopped and the priority is to replace the insert without dismantling the entire line. They also appear in fans and process pumps, where the housing is already mounted and only the rotating unit is changed.

To select the insert, take into account the shaft diameter, the locking type (set screw, eccentric or adapter) and the sealing required according to the environment: dust, moisture or washdown. Mounting requires cleaning the shaft and the housing, checking that there are no burrs and tightening the locking device with the correct wrench. Factory lubrication is usually enough for start-up, but in service it is best to follow the equipment's greasing plan. Alignment between housings prevents side loads and extends insert life.

As for interchangeability, series inserts can be replaced between brands if the shaft diameter, inner ring width, locking type and sealing configuration match. It is not enough for the part number to be similar: dimensions and mounting style must be compared. If the housing is from another brand, the usual practice is to keep the housing and change only the insert for one with equivalent dimensions. MR Accesorios Industriales will indicate the compatible alternative based on the part number or the shaft dimensions.

If you need to replace an SXRH-E insert, send us the complete part number or the shaft and housing dimensions by WhatsApp. We will quote you shortly and, if applicable, indicate the compatible alternative within the DODGE line we sell. We can also advise you on the sealing and locking best suited to your equipment's environment, so the replacement is properly resolved from the first mounting.