Insert bearing DODGE INS-SCM-111-CR

DODGE INS-SCM-111-CR is a insert bearing reference, within Bearings. Request a quote for INS-SCM-111-CR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SC series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall or pillow block units. It is used when a unit is needed that allows alignment, mounting and dismounting without dismantling the entire shaft. MR Accesorios Industriales carries this line as an official brand in Buenos Aires, Argentina, and advises you on choosing the correct size.

The designation of these inserts combines the INS prefix, the SC series code, the number that identifies the size and the CR suffix, which distinguishes the sealing variant. In the series examples, INS-SCM-111-CR appears: the SCM segment corresponds to the SC insert family and the central number defines the shaft diameter and outer ring dimensions. To request a quote, send us the complete part number as shown on the housing or the machine plate.

These inserts are found in belt conveyors, bucket elevators, mixers, screens, packaging lines and plant equipment in general. In the Argentine market they are common in the food, cement, mining, chemical and aggregate processing industries, where dust, moisture and moderate loads punish the supports. They are also used in irrigation equipment, mills and agricultural machinery that works with long shafts and requires quick mounting.

To choose correctly, take into account the shaft diameter, the type of housing where it will be seated and the sealing required by the environment: a dry plant is not the same as a wash bay or an area with pressurized water. Check the internal clearance and lubrication before mounting, seat the insert without striking the outer ring and verify the alignment of the housing. A misaligned unit shortens bearing life even when the load is low.

SC series inserts are interchanged between brands based on shaft size and housing dimensions, not by the commercial part number. That is why it is advisable to compare diameter, inner ring width, position of the set screw holes and sealing type before replacing. If the housing is from another brand, send us a photo and the shaft dimensions and we will indicate the compatible alternative.

If you need to replace an SC insert, write to us on WhatsApp with the part number or model shown on the equipment. At MR Accesorios Industriales we will quote the reference and, if applicable, indicate the alternative compatible with your housing. With more than 80 years in the field, we support plants and workshops throughout the country with technical advice.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.