Insert bearing DODGE INS-SCM-108-HT

DODGE INS-SCM-108-HT is a insert bearing reference, within Bearings. Request a quote for INS-SCM-108-HT via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SC series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and in wall or floor units. Its design allows the shaft to rotate supported in a unit that is fixed to the structure, with the possibility of aligning and adjusting the assembly on site. It is used in equipment where transmission shafts must be supported with moderate loads and normal plant speeds.

The SC series designation is read in blocks: the letters identify the insert family and the number that follows indicates the bore size, that is, the shaft diameter it accepts. In the SCM series, the M distinguishes the mounting variant, and the HT suffix indicates a version with special heat treatment of the ring. That is why it is important to read the full code: INS-SCM-100-HT, INS-SCM-103-HT, INS-SCM-107-HT or INS-SCM-200-HT are not interchangeable with each other, because each one fits a different shaft diameter.

These inserts are found in belt conveyors, bucket elevators, mixers, screens, fans and process lines in food, chemical and aggregate plants. In Argentina they are common in milling equipment, bottling plants and material handling systems, where the split housing makes replacement easier without dismantling the entire shaft. They also appear in agricultural machinery and water treatment equipment, provided the environment does not require extreme protection.

To choose the correct insert, start with the shaft diameter and the type of housing where it will be seated. Check the sealing: a simple contact lip seal is enough in clean environments, while in areas with dust or moisture a more closed protection is advisable. Check the internal clearance and the intended lubrication, and verify the alignment of the housing before tightening, because a misaligned mounting shortens the bearing life. The HT suffix responds to more demanding working conditions.

DODGE is an official brand that MR carries, and its SC series inserts have dimensional equivalents in other insert bearing lines on the market. Interchangeability is defined by the shaft diameter, the inner ring width and the locking system, not only by the code. If the equipment has another brand, send us the original code and the shaft dimensions: we will indicate the compatible alternative and quote it.

If you need to replace an SC or SCM series insert, write to us on WhatsApp with the code on the housing or with the shaft diameter. At MR Accesorios Industriales we will quote you shortly and, if a variant that does not appear in the listing is needed, we will source it or manufacture it to measure. More than 80 years supporting Argentine industry from Buenos Aires.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.