DODGE INS-SC-104S-CR insert bearing

DODGE INS-SC-104S-CR is a reference of insert bearing, within Bearings. Request a quote for INS-SC-104S-CR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SC insert bearing is a ball bearing with an extended inner ring and set screw locking system, designed to be mounted in split plummer block housings and mounted bearing units. It is used in equipment where the shaft rotates and needs support with alignment and simple disassembly, such as belt conveyors, mixers, fans and process machinery. Its sealed construction makes it suitable for environments with moderate dust or humidity.

The SC series designation is read in blocks: SC identifies the family of inserts for mounted housings; the three-digit number that follows — as in INS-SC-104S-CR — encodes the shaft diameter and the locking type. The suffix S indicates the set screw locking system on the extended inner ring, and CR indicates the double-lip contact seal. Knowing these suffixes avoids confusion when ordering a replacement, because the same diameter can have sealing or locking variants.

In Argentine industry, these inserts are seen in food, cement, aggregates and water treatment plants, mounted on split plummer block housings that MR manufactures. They also appear in belt conveyors, bucket elevators, horizontal mixers and milling equipment. The combination of an SC insert with a split plummer block housing allows the shaft to be removed without dismantling the transmission, which is key in corrective maintenance. MR Accesorios Industriales sells this line for replacement and new projects throughout the country.

To select the correct insert, take into account the shaft diameter, the locking type and the required seal. The S suffix with set screws is suitable for shafts rotating in one direction only and moderate loads; if there is rotation reversal or vibration, other locking methods should be evaluated. The CR seal protects against dust and splashes, but does not replace proper lubrication. During mounting, align the housing and tighten the set screws onto the shaft without forcing, checking that the insert seats correctly in the housing.

Mounted bearing inserts are interchangeable between brands if the main dimensions match: shaft diameter, inner ring width, set screw location and sealing type. Equivalent series from other manufacturers may differ in the ball radius or the alignment angle, so it is important to verify the total height of the insert-housing assembly. If you need to replace an SC insert, send us the complete part number and the shaft dimensions so we can indicate the compatible alternative.

If you are looking for a DODGE SC insert bearing, write to us on WhatsApp with part number INS-SC-104S-CR or the one shown on your equipment. At MR Accesorios Industriales we will quote the exact reference or the alternative that best suits your application. We can also advise you on the right split plummer block housing if you are assembling a complete unit. Send us your inquiry and we will reply promptly.