Insert bearing DODGE INS-PS-35M

DODGE INS-PS-35M is a insert bearing reference, within Bearings. Request a quote for INS-PS-35M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE PSEZ series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used in equipment where the bearing needs to be replaced without changing the complete housing, and its design allows it to be secured to the shaft with set screws. MR Accesorios Industriales supplies this line with technical assistance to choose the correct size.

The PSEZ series designation is read from the INS-PS-#M code: the letters PS identify the family of inserts for split plummer block housings, and the number that follows —20, 25, 30, 35, 40 or 50— corresponds to the shaft diameter in millimeters. The final M indicates the type of shaft attachment. Thus, INS-PS-30M is an insert for a 30 mm shaft. Send the complete code and we will quote the exact size.

These inserts are used in belt conveyors, packaging lines, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed, meatpacking and water treatment industries, where the split plummer block housing facilitates maintenance without dismantling the complete shaft. They are also used in high-flow fans and blowers.

To select the insert, take into account the shaft diameter, the type of load —radial, axial or combined— and the environmental conditions. In dusty or humid environments, it is advisable to check the housing sealing and lubrication. Mounting requires cleaning the shaft, aligning the housing and tightening the set screws with a torque wrench according to the recommended torque. Poor alignment shortens bearing life.

DODGE PSEZ series inserts are interchangeable with other brands that use the same diameter and attachment nomenclature, although sealing or internal clearance may vary. If the original code is not available, it can be replaced by an insert of the same diameter and attachment type, verifying the housing dimensions. MR Accesorios Industriales will indicate the compatible alternative.

If you need an insert for your equipment, send the INS-PS-#M code or the housing model via WhatsApp to MR Accesorios Industriales. We will quote promptly and advise you on installation and maintenance. We can also manufacture custom split plummer block housings if your application requires it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.