DODGE FB-DLEZ-100-P flange bearing 4 holes

DODGE FB-DLEZ-100-P is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for FB-DLEZ-100-P via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

DODGE FB-DLEZ series 4-bolt flange mounted bearings are units that combine a bearing and its housing in a single assembly. This type includes part numbers such as FB-DLEZ-012-P, FB-DLEZ-103-P and FB-DLEZ-107-P. The middle number identifies the shaft size and changes with each part number.

The four-bolt flange is bolted against a flat surface perpendicular to the shaft, such as the front of a machine, a frame or a closing plate. The four mounting points distribute the load and give the unit stable support. A mounted unit arrives as an assembly, which simplifies installation and replacement compared with assembling the bearing and housing separately.

Part numbers of this type have the format FB-DLEZ, a three-digit number (012, 015, 100, 103, 107, among others) and the -P suffix. The middle number identifies the shaft size of each unit and the final P distinguishes this version; both are part of the complete designation and must be stated when ordering.

When choosing a unit of this type, check the shaft diameter, the mounting surface and the environment where it will work. A worn or out-of-tolerance shaft affects any bearing, so it is advisable to measure it before installing the replacement.

For mounting, make sure the mounting surface is flat and that the shaft is aligned with the unit. Tighten the bolts in a crosswise and even pattern, then turn the shaft by hand to confirm there are no hard spots. Any question about securing it to the shaft is resolved with the manufacturer's technical sheet.

To request a quote, send us by WhatsApp or email the complete part number, such as FB-DLEZ-103-P, with the quantity you need. A photo of the installed unit helps to confirm. We reply shortly, from Buenos Aires, Argentina.