Flange bearing 4 holes DODGE F4B-SCEZ-010L-SH

DODGE F4B-SCEZ-010L-SH is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCEZ-010L-SH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange bracket with DODGE SCEZ insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with four bolts. It is used to guide rotating shafts in equipment where rigid support and simple alignment are required. MR Accesorios Industriales sells this line as an official brand for plants and workshops in Buenos Aires, Argentina.

The SCEZ series designation is read in blocks: the initial letters identify the flange bracket family with insert bearing, and the numbers that follow indicate the shaft size. In the examples F4B-SCEZ-008L-SH and F4B-SCEZ-010L-SH, the final numeric section indicates the nominal shaft diameter in inches. The L suffix corresponds to the insert locking variant, and SH to a specific bracket configuration. To order the correct part number, provide the full model shown on the nameplate or in the equipment drawing.

These brackets are found in belt conveyors, mixers, blowers, centrifugal pumps, screens and packaging lines. In the Argentine market they appear in food plants, cement plants, paper mills, tanneries and maintenance workshops that replace worn units. The 4-bolt flange allows mounting on sheet metal or profile structure, with the shaft perpendicular to the mounting plane. Being a mounted unit, it simplifies assembly because the bearing and housing do not have to be aligned separately.

To choose correctly, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal defines the protection against dust, water or chips: in humid environments or with frequent washing, a tighter seal is advisable. Lubrication comes from the factory, but in service it is advisable to check the condition of the grease and the internal clearance. When mounting, place the flange on a clean, flat surface, tighten the four bolts in a cross pattern and check that the shaft turns without effort.

As for equivalents, flange brackets with insert bearing are interchanged between brands by shaft number, number of bolts and locking type, not by the full part number. The same diameter may have different center heights and distances between bolts, so replacement is confirmed by comparing critical dimensions. MR Accesorios Industriales tells you the compatible alternative when the original part number is not available or has changed nomenclature.

If you need to replace a DODGE SCEZ series flange bracket, send via WhatsApp the part number shown on the equipment or the shaft and flange dimensions. At MR Accesorios Industriales we quote it and, if necessary, we tell you the compatible alternative. We also manufacture split plummer block housings and custom parts for special cases.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.