Flange bearing 4 holes DODGE F4B-SCEZ-010L-PCR

DODGE F4B-SCEZ-010L-PCR is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F4B-SCEZ-010L-PCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCEZ series 4-bolt flange Y-bracket with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a flat surface with four bolts. It is used to support rotating shafts in equipment where rigid, centered fastening is required, with the advantage that the bearing comes already housed and aligned from the factory. MR Accesorios Industriales carries this DODGE line in Buenos Aires, Argentina.

The SCEZ series designation is read in blocks. In F4B-SCEZ-008L-PCR, F4B indicates the housing type: 4-bolt flange; SCEZ identifies the insert bearing series, with its own seal and line characteristics; 008L is the shaft size code, which in practice corresponds to a nominal diameter in inches; and PCR indicates a finish or sealing variant. The examples F4B-SCEZ-010L-PCR and F4B-SCEZ-110L-PCR show how the numeric block changes with size. To choose, the key data is the complete part number: with that part number we will quote the exact unit.

These brackets appear in belt conveyors, bucket elevators, mixers, screens, mills and process equipment in food, chemical and aggregate plants. They are also found in industrial fans, centrifugal pumps and packaging lines, where the 4-bolt flange allows mounting on plate or structure with a symmetrical bolt pattern. In Argentina they are widely seen in the oilseed, meatpacking and waste treatment industries, always in applications with moderate loads and shafts rotating at medium speeds.

To select the correct bracket, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal determines whether the unit withstands dust, water or frequent washdowns. Lubrication comes from the factory, but a relubrication plan should be planned according to temperature and speed. During mounting, the flange must rest on a clean, flat surface; the four bolts are tightened in a cross pattern and with a torque wrench. Check shaft alignment with the equipment before starting up.

As for equivalents, 4-bolt flange brackets with insert bearings are available from several brands under their own nomenclatures. Interchangeability is not automatic: shaft diameter, hole spacing, center height and insert locking type must be compared. The DODGE SCEZ series has its own geometry, so if the part number does not match, the best approach is to send the dimensions or the original part number and we will indicate the compatible alternative. We do not force replacements that do not match dimensionally.

If you need a DODGE SCEZ series 4-bolt flange Y-bracket, send the complete part number by WhatsApp to MR Accesorios Industriales. With F4B-SCEZ-008L-PCR, F4B-SCEZ-010L-PCR or F4B-SCEZ-110L-PCR we will quote it shortly. If the part number you are looking for does not appear among these examples, write to us anyway with the model or dimensions and we will give you an answer.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.