Flange bearing 2 holes DODGE F2BSO-SCFS-35M-SHFS

DODGE F2BSO-SCFS-35M-SHFS is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2BSO-SCFS-35M-SHFS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SCFS series Y-bearing with insert is a 2-bolt flange mounted bearing, designed to secure rotating shafts to flat structures. It is used in equipment where the mounting must be compact and the shaft is perpendicular to the mounting surface. MR Accesorios Industriales supplies this line as an official brand, with options for different shaft sizes and sealing configurations.

The SCFS series designation is read in blocks: the prefix F indicates the flange, the number that follows —2 in the examples— corresponds to the number of mounting holes, and BSO identifies the housing type. The intermediate numeric code, such as 20, 25, 30, 35 or 40, indicates the shaft diameter for which the insert is intended. The suffix M distinguishes the sealing variant, and SHFS completes the mounting configuration. Thus, an F2BSO-SCFS-30M-SHFS is a 2-bolt flange housing for a 30 mm shaft with M sealing.

These housings are used in conveyors, agitators, fans, centrifugal pumps and process lines where a front mounting with limited space is required. In Argentina they are common in food, chemical and aggregate processing plants, as well as in irrigation equipment and agricultural machinery. The 2-bolt flange allows the housing to be aligned on plates or structural profiles, and the insert with deep groove ball bearing accommodates minor misalignments typical of mounting.

To select the housing, check the shaft diameter and the type of load: the SCFS series covers applications with moderate radial load and medium speed. The M seal protects against dust and moisture, making it suitable for environments with particles or frequent washdowns. During mounting, ensure the flange sits flat and the bolts are tightened evenly to avoid deforming the insert. Factory lubrication is usually sufficient, but under severe conditions it is advisable to check the lubricant condition and shaft alignment.

Flange mounted bearings have equivalents across manufacturers: different brands offer similar configurations in dimensions and load capacity. When requesting a quote, the safest approach is to provide the complete code —for example, F2BSO-SCFS-25M-SHFS— and the operating conditions. MR Accesorios Industriales can indicate the compatible alternative within the brands it supplies, without the need to adapt the mounting. Interchangeability depends on verifying shaft diameter, hole spacing and overall height.

If you need to replace a Y-bearing with insert, write to us on WhatsApp and send us the code or model shown on the part. At MR Accesorios Industriales we will quote you promptly and guide you so the solution fits your equipment. We can also advise you if you are looking for a variant with a different type of seal or a different shaft size within the SCFS series.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.