DODGE F2BSO-SCFS-25M-SHFS flange bearing 2 holes

DODGE F2BSO-SCFS-25M-SHFS is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2BSO-SCFS-25M-SHFS via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCFS series Y-bearing with insert bearing is a 2-bolt flange mounted bearing, designed to secure rotating shafts to flat structures. It is used in equipment where the mounting must be compact and the shaft sits perpendicular to the mounting surface. MR Accesorios Industriales sells this line, with options for different shaft sizes and sealing configurations.

The SCFS series designation is read in blocks: the prefix F indicates the flange, the number that follows —2 in the examples— corresponds to the number of mounting holes, and BSO identifies the housing type. The intermediate numeric code indicates the shaft diameter for which the insert is intended. The suffix M distinguishes the sealing variant, and SHFS completes the mounting configuration. Thus, a code such as F2BSO-SCFS-30M-SHFS corresponds to a 2-bolt flange housing for a 30 mm shaft with M sealing.

These housings are used in conveyors, agitators, fans, centrifugal pumps and process lines where a front mounting with little space is required. In Argentina they are common in food, chemical and aggregate processing plants, as well as in irrigation equipment and agricultural machinery. The 2-bolt flange allows the housing to be aligned on plates or structural profiles, and the insert with deep groove ball bearing accommodates minor misalignments typical of mounting.

To select the housing, check the shaft diameter and the load type: the SCFS series covers applications with moderate radial load and medium speed. The M sealing protects against dust and moisture, so it is suitable in environments with particles or frequent washdowns. During mounting, make sure the flange sits flat and the bolts are tightened evenly so as not to deform the insert. Factory lubrication is usually sufficient, but under severe conditions it is advisable to check the condition of the lubricant and the shaft alignment.

Flange mounted bearings have equivalents across manufacturers: different brands offer similar configurations in dimensions and load capacity. When requesting a quote, the safest approach is to provide the full code —for example, F2BSO-SCFS-25M-SHFS— and the working conditions. MR Accesorios Industriales can point you to the compatible alternative among the brands it sells, with no need to adapt the mounting. Interchangeability depends on verifying shaft diameter, hole spacing and overall height.

If you need to replace a Y-bearing with insert bearing, write to us on WhatsApp and send us the code or the model shown on the part. At MR Accesorios Industriales we will quote you promptly and guide you so the solution fits your equipment. We can also advise you if you are looking for a variant with a different type of sealing or a different shaft size within the SCFS series.