DODGE F2B-SXR-200L-FF flange bearing 2 holes

DODGE F2B-SXR-200L-FF is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SXR-200L-FF via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SXR series Y-bearing with insert is a 2-bolt flange mounted bearing unit: a compact assembly that combines a cast iron housing with a self-aligning, sealed ball insert. It is used to support shafts on structures that require bolted front mounting and some tolerance to misalignment, with simple mounting and disassembly on power transmission and conveying equipment.

The SXR series designation is read in blocks. The initial F indicates the flange housing type and the 2B the number and arrangement of the mounting holes; SXR identifies the insert family with its seals and shaft locking system; the three-digit number that follows (as in F2B-SXR-200L-FF) references the shaft diameter, and the L suffix defines the locking variant. The FF endings indicate the sealing type of the unit. With this data, the part you need is identified unambiguously.

In Argentine industry, these housings appear in belt conveyors, bucket elevators, screens, mixers, fans and packaging lines. They are also found in food, cement, aggregate and water treatment plants, where the environment is humid or dusty and an easy-to-replace flange support is sought. Being a mounted unit, it simplifies assembly: there is no need to machine the housing or fit the bearing into the housing.

To choose correctly, check the shaft diameter, the expected radial and axial load and the shaft locking type the insert accepts. FF sealing is suitable for environments with fine dust or splashes; in areas with frequent washdown, verify the seal material and lubrication. During mounting, seat the flange on a flat, rigid surface, tighten the bolts in a cross pattern and align the shaft before tightening. The insert absorbs slight angular misalignment, but do not use it to correct a mounting error.

As for interchangeability, mounted housings are compared by shaft diameter, hole arrangement, center height and locking type. Between brands, the same shaft diameter may vary in center-to-center distance and sealing, so it is best to cross-reference the complete designation and not just the shaft number. If the original equipment carries another brand, send us the part number and the flange dimensions: we will indicate the compatible alternative from the DODGE line.

MR Accesorios Industriales distributes the DODGE brand and also manufactures split plummer block housings, ANSI roller chains and pulleys (sheaves) in Buenos Aires, Argentina. If you need this Y-bearing or a variant of the SXR series, send the part number via WhatsApp —for example F2B-SXR-200L-FF— along with the shaft diameter and a photo of the flange. We will quote it promptly.