Flange bearing 2 holes DODGE F2B-SXR-200L

DODGE F2B-SXR-200L is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SXR-200L via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE SXR series 2-bolt flange mounted bearing is an assembly consisting of a flange housing and a ball insert bearing, designed to mount on flat surfaces and support rotating shafts. It is used in equipment where simple fastening and proper alignment are required, such as conveyor belts, agitators or fans. MR Accesorios Industriales sells this line as an official brand, with more than 80 years of experience in the Argentine industrial market.

The SXR series designation is interpreted from its letters and numbers. In the example F2B-SXR-200L, the first part F2B indicates a 2-bolt flange housing (flange bracket, 2 bolts). Then, SXR identifies the insert bearing series, which in this case corresponds to a ball insert with specific sealing and fastening characteristics. The number 200 refers to the nominal shaft diameter, and the suffix L indicates a construction variant within the series. Knowing this nomenclature allows you to select the correct assembly for each application.

These mounted bearings are used in a wide variety of industries in Argentina. They are common in food and beverage plants, where hygiene and frequent washing require components with good sealing. They also appear in the metallurgical sector, in belt conveyors, mixers and process equipment. In the chemical and pharmaceutical industry they are chosen for their ability to withstand moderate loads with flexible alignment. They are also found in ventilation systems, centrifugal pumps and agricultural machinery, whenever flange mounting is the appropriate solution.

To correctly select a Y-bearing with insert bearing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Sealing is key: in dusty or humid environments, it is advisable to choose seals with greater protection. Lubrication must be the one indicated by the manufacturer and renewed according to the duty cycle. During mounting, verify that the support surface is clean and flat, and that the fastening screws are tightened evenly to avoid deformation. The alignment between the shaft and the housing must be careful to prolong the service life of the bearing.

Regarding equivalences and interchangeability, 2-bolt flange mounted bearings with ball insert can usually be replaced between brands if the main dimensions match: shaft diameter, distance between mounting holes, housing outer diameter and width. However, each manufacturer may have variants in sealing, insert fastening system or load capacity. Therefore, it is always advisable to verify compatibility before replacing a component. MR Accesorios Industriales can advise you to find the right alternative within its product line.

If you need a DODGE SXR series flange mounted bearing, write to us on WhatsApp with the part number F2B-SXR-200L or with your shaft dimensions and the distance between holes. At MR Accesorios Industriales we will quote you promptly and indicate the option that best suits your equipment. With more than 80 years of experience, we continue to support Argentine industry with reliable solutions.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.