Flange bearing 2 holes DODGE F2B-SCMED-35M

DODGE F2B-SCMED-35M is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-SCMED-35M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange bearing unit with DODGE SCMED insert bearing is a mounted assembly that combines a cast housing with an insert ball bearing, ready to be fastened to a flat surface with two bolts. It is used to guide and support rotating shafts in equipment where the mounting must sit flush with a wall or structure. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission.

The SCMED series designation is read in blocks: the letter F indicates the flange housing type, 2B corresponds to the two-bolt variant, SCMED identifies the insert series and the final number —25, 30, 35, 40, 45, 50 or 55— indicates the shaft diameter in millimeters. Thus, an F2B-SCMED-30M is a 2-bolt flange bearing unit for a 30 mm shaft. The suffix M distinguishes the metric version. Knowing this logic allows you to order the exact part number or the equivalent alternative.

These units appear in belt conveyors, bucket elevators, mixers, blowers, centrifugal pumps and packaging lines. In the Argentine market they are found in food plants, cement plants, tanneries, water treatment plants and metalworking shops. The 2-bolt flange simplifies mounting on folded sheet metal or profile structures, and the insert with set screws facilitates adjustment on the shaft without additional machining.

To select the unit, check the shaft diameter and the type of fastening your machine accepts. Check the insert seal: versions with a contact seal are suitable for environments with moderate dust or moisture. When mounting, align the flange with the shaft line and tighten the insert set screws evenly. The bearing is lubricated from the factory; in service, replenish grease according to the duty cycle. Careful alignment extends the life of the assembly.

Insert bearing units from different brands are interchangeable if the flange dimensions, shaft diameter and fastening system match. Metric series usually have equivalents in other lines, but it is advisable to verify the mounting holes and the insert type before replacing. If you need an alternative to the SCMED series, at MR Accesorios Industriales we will indicate the option compatible with your application.

To request a quote for your DODGE SCMED series unit, send us the complete part number on WhatsApp —for example, F2B-SCMED-40M— or your shaft dimensions and the distance between the flange holes. We will reply shortly with availability and the alternative that best suits your equipment. MR Accesorios Industriales, Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.