DODGE F2B-SCMED-30M flange bearing 2 holes

DODGE F2B-SCMED-30M is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SCMED-30M via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE SCMED series 2-bolt flange bearing housing with insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fastened to a flat surface with two bolts. It is used to guide and support rotating shafts in equipment where the mounting must sit flush against a wall or structure. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, in power transmission.

The SCMED series designation is read in blocks: the letter F indicates the flange housing type, 2B corresponds to the two-bolt variant, SCMED identifies the insert series and the final number —25, 30, 35, 40, 45, 50 or 55— indicates the shaft diameter in millimeters. So a F2B-SCMED-30M is a 2-bolt flange housing for a 30 mm shaft. The suffix M identifies the metric version. Knowing this logic lets you order the exact part number.

These housings appear in belt conveyors, bucket elevators, mixers, blowers, centrifugal pumps and packaging lines. In the Argentine market they are found in food plants, cement plants, tanneries, water treatment plants and metalworking shops. The 2-bolt flange simplifies mounting on folded sheet metal or profile structures, and the insert with set screws makes adjustment on the shaft easy without additional machining.

To select the housing, check the shaft diameter and the type of mounting your machine accepts. Check the insert sealing: versions with a contact lip seal are suitable for environments with moderate dust or moisture. When mounting, align the flange with the shaft line and tighten the insert set screws evenly. The bearing lubrication comes from the factory; in service, replenish grease according to the duty cycle. Careful alignment extends the life of the assembly.

Insert bearing housings from different brands are interchangeable if the flange dimensions, shaft diameter and mounting system match. Metric series usually have equivalents in other lines, but it is advisable to verify the mounting holes and the insert type before replacing. If you need an alternative to the SCMED series, at MR Accesorios Industriales we will point you to the option compatible with your application.

To request a quote for your DODGE SCMED series housing, send us the complete part number on WhatsApp —for example, F2B-SCMED-40M— or the dimensions of your shaft and the distance between the flange holes. We will reply shortly with availability and the alternative that best suits your equipment. MR Accesorios Industriales, Buenos Aires, Argentina.