DODGE F2B-SCEZ-010L-P flange bearing 2 holes
- Brand
- DODGE
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SCEZ
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F2B-SCEZ-010L-P is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-SCEZ-010L-P via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The 2-bolt flange housing with DODGE SCEZ series insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a flat surface with two bolts. It is used to guide shafts in equipment where the mounting must be compact and alignment is achieved by the flange itself. MR Accesorios Industriales carries this line in Buenos Aires, Argentina.
The SCEZ series designation is read in blocks: the prefix F…B indicates the flange type and number of holes, SCEZ identifies the insert series, the number that follows indicates the shaft diameter and the suffix L-P defines the sealing and fixing configuration. For example, F2B-SCEZ-008L-P corresponds to a 2-bolt flange housing for an 8/8 inch shaft, while F2B-SCEZ-110L-P uses the same housing with a different shaft diameter. Knowing these blocks allows you to order the exact part number without ambiguity.
These housings are used in belt conveyors, bucket elevators, mixers, fans and packaging lines. In Argentina they are common in food, cement, mining and aggregate processing plants, where the environment usually has dust, moisture or frequent washdowns. The 2-bolt flange allows mounting on sheet metal or structure without machining, and the insert bearing absorbs small misalignments from assembly.
To select the housing, check the shaft diameter and the insert fixing type. Sealing is key: in dusty or wet environments, choose the version with a contact seal and additional protection. The insert is lubricated from the factory, but it is advisable to plan relubrication if the equipment operates at high temperature or speed. When mounting, rest the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns freely before connecting the transmission.
SCEZ series insert bearing housings are interchangeable with other brands that use the same flange standard and shaft diameter, as long as the hole spacing and insert diameter match. Not all equivalences are direct: some brands vary the sealing or the fixing system. If you need to replace an existing housing, send us the part number stamped on the part and we will indicate the compatible alternative.
MR Accesorios Industriales carries the DODGE line in Buenos Aires, Argentina. If you have the housing part number or the shaft diameter and hole spacing, write to us on WhatsApp and we will quote you promptly.
Dimensions
- Bore
- 5/8 in
Frequently Asked Questions
- What does the abbreviation SCEZ mean in this housing?
- SCEZ identifies the insert bearing series within the DODGE nomenclature system. In the complete part number, the preceding letters indicate the flange type and number of holes, and the number after the hyphen indicates the shaft diameter. The suffix L-P defines sealing and fixing.
- How do I choose the housing for my shaft?
- You need the shaft diameter, the flange hole spacing and the insert fixing type. With that data we will indicate the exact part number of the SCEZ series. If you already have a mounted housing, send us the part number stamped on the part and we will cross-reference it with the DODGE line.
- Can the insert bearing be relubricated?
- Yes, many inserts in this series can be relubricated. The frequency depends on speed, temperature and the level of contamination in the environment. In applications with a lot of dust or frequent washdowns, it is advisable to set a short interval and use the grease recommended by the equipment manufacturer.