Flange bearing 2 holes DODGE F2B-GTEZ-200-PCR

DODGE F2B-GTEZ-200-PCR is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-GTEZ-200-PCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GTEZ Y-bearing insert unit is a 2-bolt flange mounted bearing, ready to fasten to the structure with two bolts. It is used to support rotating shafts in equipment where mounting must be quick and the bearing remains self-aligning. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, with more than 80 years of experience in power transmission and bearing housings.

The GTEZ series designation is read in blocks: F indicates the 2-bolt flange, B the housing type, GTEZ the insert bearing series and PCR the sealing. The number that follows GTEZ identifies the shaft size: in the examples they range from 04 to 012, which correspond to increasing diameters. Thus, an F2B-GTEZ-06-PCR is a flange housing with insert bearing for a size 06 shaft, with PCR sealing. To order the correct part number, send us the shaft size or the complete code.

These housings are used in conveyors, belts, elevators, mixers, fans and process lines. In Argentina they are common in food, cement, chemical and aggregate processing plants, where the environment has dust or moisture. The 2-bolt flange allows them to be mounted on existing sheet metal or structure, and the self-aligning insert absorbs small shaft misalignments. They are also chosen for equipment where access for lubrication is limited, because the PCR sealing helps retain lubricant and slow the ingress of contaminants.

To select the housing, first define the shaft diameter and the mounting type. Then check the sealing: the PCR suffix indicates reinforced protection for dusty or wet environments. During mounting, rest the flange on a flat surface, tighten the bolts evenly and verify that the shaft turns freely. Lubrication is done through the insert channel; use the grease indicated for the application and do not mix different bases. If the equipment runs with vibration, check the bolt tightness and shaft alignment.

2-bolt flange mounted bearings are available from several brands with their own nomenclatures. Equivalents are found by dimensions: shaft diameter, distance between bolt holes and center height. Do not rely on the code alone, because each manufacturer uses different letters for the same housing type. If you have another brand's code, send it together with the shaft size and we will indicate the compatible alternative from the GTEZ series or another line that suits your equipment.

To request a quote for a DODGE GTEZ Y-bearing insert unit, write to us on WhatsApp with the complete code or the shaft size. At MR Accesorios Industriales we quote promptly and, if you need a variant that is not listed, we look for it or offer you the equivalent option. We can also advise you on sealing and mounting according to the working environment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.