DODGE F2B-GTEZ-115-SHCR flange bearing 2 holes

DODGE F2B-GTEZ-115-SHCR is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-GTEZ-115-SHCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE GTEZ series Y-bearing with insert is a two-bolt flange mounted bearing: the housing is fastened with two bolts to a flat surface and the insert rotates on the spherical outer ring, which allows it to absorb small shaft misalignments. It is used to support drive shafts in equipment where the mounting must sit flush with a wall or frame, with simple alignment and accessible maintenance.

The designation is read in blocks. F2B indicates the two-bolt flange housing; GTEZ identifies the pillow block series and its mounting geometry; the number that follows indicates the shaft diameter, as in F2B-GTEZ-04-SHCR, F2B-GTEZ-06-SHCR or F2B-GTEZ-08-SHCR. The SHCR suffix defines the insert configuration and its sealing. With those three data points —housing type, series and size— the complete part is identified.

In Argentine industry they appear in belt and screw conveyors, bucket elevators, mixers, screens, fans and packaging lines. They are also found in food plants, water treatment and mining, where the shaft needs a robust support that is easy to replace. Because they are flanged, they solve mountings on sheet metal or cast iron with front access, which is common in compact equipment and in frames where a pillow block does not fit.

To select, start from the shaft diameter and the radial and axial load the support must bear. Check the flange hole spacing and the bolt diameter against the mounting surface. The insert is self-aligning within a limited range: it does not replace correct shaft alignment. Check the sealing according to the environment (dust, water, washdown) and relubricate with the grease specified for the insert. Tighten the bolts evenly and check the clearance during assembly.

Equivalences between brands are handled by dimensions: shaft diameter, hole spacing, bolt diameter and flange height. A pillow block from another brand with the same combination may be interchangeable, but it is advisable to also compare the insert type and its sealing. If you need to replace an existing code, send us the shaft size and the complete code: at MR Accesorios Industriales we will tell you the compatible alternative.

To request a quote, send the complete code on WhatsApp, for example F2B-GTEZ-05-SHCR or F2B-GTEZ-10-SHCR, along with the shaft diameter and the type of mounting. If the equipment works in a dusty or wet environment, mention it so we can advise you on the sealing. MR Accesorios Industriales sells the DODGE brand and replies promptly with the quote and the corresponding alternative.