Flange bearing 2 holes DODGE F2B-GTEZ-04-SHCR

DODGE F2B-GTEZ-04-SHCR is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-GTEZ-04-SHCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE GTEZ series Y-bearing with insert is a 2-bolt flange mounted bearing unit: the housing is fastened with two bolts to a flat surface and the insert rotates on the spherical outer ring, which allows it to absorb small shaft misalignments. It is used to support transmission shafts in equipment where the mounting must sit flush with a wall or frame, with simple alignment and accessible maintenance.

The designation is read in blocks. F2B indicates the 2-bolt flange housing; GTEZ identifies the housing series and its mounting geometry; the number that follows indicates the shaft diameter, as in F2B-GTEZ-04-SHCR, F2B-GTEZ-06-SHCR or F2B-GTEZ-08-SHCR. The SHCR suffix defines the insert configuration and its sealing. With those three data points —housing type, series and size— the complete part is identified.

In Argentine industry they appear in belt and screw conveyors, bucket elevators, mixers, screens, fans and packaging lines. Also in food plants, water treatment and mining, where the shaft needs robust and easily replaceable support. Being flange mounted, they solve mountings on sheet metal or cast iron with front access, something common in compact equipment and in frames where a pillow block does not fit.

To select, start from the shaft diameter and the radial and axial load that the support must bear. Check the distance between the flange holes and the bolt diameter against the mounting surface. The insert is self-aligning within a limited range: it does not replace correct shaft alignment. Check the sealing according to the environment (dust, water, washdown) and relubricate with the grease indicated for the insert. Tighten the bolts evenly and check the clearance during mounting.

Equivalences between brands are handled by dimensions: shaft diameter, distance between holes, bolt diameter and flange height. A housing from another brand with the same combination may be interchangeable, but it is advisable to also compare the insert type and its sealing. If you need to replace an existing part number, send us the shaft measurement and the complete part number: at MR Accesorios Industriales we indicate the compatible alternative.

To request a quote, send the complete part number on WhatsApp, for example F2B-GTEZ-05-SHCR or F2B-GTEZ-10-SHCR, along with the shaft diameter and the mounting type. If the equipment operates in a dusty or wet environment, mention it so we can advise you on the sealing. MR Accesorios Industriales carries the DODGE brand and responds shortly with the quote and the corresponding alternative.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.