DODGE F2B-GTEZ-04-PCR flange bearing 2 holes

DODGE F2B-GTEZ-04-PCR is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-GTEZ-04-PCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE GTEZ Y-bearing flange unit is a 2-bolt flange mounted bearing, ready to bolt to the structure with two screws. It is used to support rotating shafts in equipment where mounting must be quick and the bearing is self-aligning. MR Accesorios Industriales sells this DODGE line in Buenos Aires, Argentina, in power transmission and bearing housings.

The GTEZ series designation is read in blocks: F indicates the 2-bolt flange, B the housing type, GTEZ the insert bearing series and PCR the seal. The number after GTEZ identifies the shaft size, which varies by code. So a code such as F2B-GTEZ-06-PCR is a flange housing with insert bearing for a size 06 shaft, with PCR seal. To order the correct code, send us the shaft size or the full code.

These housings are used in conveyors, belts, elevators, mixers, fans and process lines. In Argentina they are common in food, cement, chemical and aggregate processing plants, where the environment has dust or moisture. The 2-bolt flange allows mounting on existing sheet metal or structure, and the self-aligning insert absorbs small shaft misalignments. They are also chosen in equipment where access for lubrication is limited, because the PCR seal helps retain lubricant and stop contaminants from entering.

To select the housing, first define the shaft diameter and the mounting type. Then check the seal: the PCR suffix indicates reinforced protection for dusty or wet environments. During mounting, rest the flange on a flat surface, tighten the screws evenly and check that the shaft turns freely. Lubrication is done through the insert channel; use the grease indicated for the application and do not mix different bases. If the equipment runs with vibration, check the screw tightness and shaft alignment.

2-bolt flange mounted bearings are available from several brands with their own nomenclature. Equivalents are found by dimensions: shaft diameter, distance between holes and center height. Do not rely on the code alone, because each manufacturer uses different letters for the same housing type. If you have another brand's code, send it together with the shaft size and we will indicate the compatible alternative from the GTEZ series or another line that suits your equipment.

To request a quote for a DODGE GTEZ Y-bearing flange unit, write to us on WhatsApp with the full code or the shaft size. At MR Accesorios Industriales we quote promptly and, if you need a variant that is not listed, we look for it or offer you the equivalent option. We can also advise you on the seal and mounting according to the working environment.