Product page
Flange bearing 2 holes DODGE F2B-DLM-35M
- Manufacturer Part Number
- F2B-DLM-35M
- Brand
- DODGEOfficial brand
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- DLM
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DODGE F2B-DLM-35M is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-DLM-35M via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DODGE DLM series Y-bearing housing is a 2-bolt flange unit that combines an insert ball bearing with a mounting housing. It is used to support rotating shafts in equipment where simple fixing and self-alignment are required. MR Accesorios Industriales supplies this DODGE line in Buenos Aires, Argentina, with technical advice to choose the right configuration.
The DLM series designation is read in blocks: the letter F indicates the 2-bolt flange type, the number that follows defines the shaft diameter, and the suffix B indicates the mounting variant. For example, F2B-DLM-35M corresponds to a 2-bolt flange housing for a 35 mm shaft. The complete code identifies the exact configuration: housing type, diameter and insert version.
These housings are used in belt conveyors, conveyor belts, mixers, mills, centrifugal pumps and process equipment in food, chemical and aggregate plants. In Argentina, they are common in the oilseed, meat processing and water treatment industries. Their flange design facilitates mounting on metal structures or masonry, with two anchoring points that simplify installation and replacement.
To select the DLM housing, check the shaft diameter and the load type: radial, axial or combined. The insert usually comes factory-lubricated and with seals that retain grease and block contaminants. During mounting, ensure the flange sits flat and the bolts are tightened in a cross pattern. Alignment between housings is key to avoid stress on the bearing and extend its service life.
DODGE DLM housings are interchangeable with other brands that use the same 2-bolt flange nomenclature and shaft diameter. When requesting a quote, provide the complete code or the shaft dimensions and the distance between holes. MR Accesorios Industriales advises you to find the right equivalent within its line of housings and insert bearings.
If you need a Y-bearing housing for your equipment, send the code or shaft dimensions via WhatsApp to MR Accesorios Industriales. We will quote you promptly and indicate the compatible alternative if needed. With more than 80 years in the industry, at MR Accesorios Industriales we resolve technical mounting and selection queries so your line keeps running.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Número de producto
- 126641
- Eje o agujero
- 35 mm
Frequently Asked Questions
- What does the designation F2B-DLM-35M mean?
- The F indicates 2-bolt flange, 2B the mounting variant, DLM the housing series and 35 the shaft diameter in millimeters. The final M indicates a specific insert version. This code identifies the complete configuration.
- How do I choose the right DLM housing for my application?
- You need the shaft diameter, load type and environmental conditions. If there is dust or moisture, a reinforced seal is advisable. Send me that data via WhatsApp and we will indicate the DLM option that best suits you.
- Are DLM housings compatible with other brands?
- Yes, they are generally interchangeable with other brands that use the same 2-bolt flange standard and shaft diameter. To confirm the equivalence, send the code or main dimensions and we will advise you.