Flange bearing 2 holes DODGE F2B-DLM-100

DODGE F2B-DLM-100 is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-DLM-100 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DODGE DLM series Y-bearing unit with insert bearing is a 2-bolt flange mounted bearing, designed to fix rotating shafts to a flat structure and absorb radial loads with automatic alignment. It is used in equipment where mounting must be compact and the shaft needs freedom of self-alignment. MR Accesorios Industriales sells this line as an official brand, with alternatives for different shaft sizes and sealing configurations.

The DLM series designation is read in blocks: the letter F indicates the flange housing type, the number that follows —2 in the examples— defines the number of mounting holes, and B indicates that the insert is a ball bearing with set screw locking. The suffix DLM identifies the housing and insert series, and the last number —100, 103, 107, 108, 111, 112, 115 or 200— encodes the shaft size according to the manufacturer's table. Thus, an F2B-DLM-107 is not interchangeable with an F2B-DLM-111: the shaft diameter changes.

These units are seen in belt conveyors, bucket elevators, mixers, mills, screens and process equipment in food, chemical and aggregate plants. In Argentina they are common in packaging lines, water treatment plants and material handling systems where mounting on sheet metal or structural profile requires a two-bolt flange and a bearing that self-aligns against small frame deviations.

To choose the correct unit, first define the shaft diameter and the type of load —radial, axial or combined—. Check the sealing: versions with contact lip seal protect better against dust and moisture, while single lip seals are for cleaner environments. The internal clearance and lubrication of the insert influence service life: in applications with vibration or temperature, it is advisable to verify the grease viscosity and the relubrication frequency. Aligning the flange with the shaft is key to avoiding parasitic stresses.

DODGE manufactures this series under standards that guarantee dimensional interchangeability with other brands of 2-bolt flange mounted bearings. If you need to replace an existing unit, compare the shaft diameter, the distance between holes and the type of insert locking. In many cases, an equivalent code from another brand may work, but it is always advisable to confirm the mounting dimensions. MR Accesorios Industriales advises you to find the compatible alternative.

To request a quote for the DODGE DLM series Y-bearing unit you need, send us via WhatsApp the complete code —for example, F2B-DLM-108— or the shaft dimensions and the distance between holes. We will reply promptly with the option that best fits your equipment. We can also indicate the alternative if the exact code is not available.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.