DODGE F2B-DLEZ-104S-SHCR flange bearing 2 holes

DODGE F2B-DLEZ-104S-SHCR is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for F2B-DLEZ-104S-SHCR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DODGE DLEZ series Y-bearing flange unit is a 2-bolt flange mounted bearing: the housing is fastened with two bolts and houses a self-aligning ball insert, so it absorbs slight misalignments between the shaft and the structure. It is used to support drive shafts in equipment where compact fastening against a wall or frame is required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina.

The designation is read in blocks. The initial F identifies the 2-bolt flange configuration; it is followed by the size and housing type, and the DLEZ group defines the insert family with its seals and shaft locking system. The suffix S corresponds to the shaft diameter in inches and SHCR to the sealing and construction features of the insert. Thus, a code such as F2B-DLEZ-104S-SHCR breaks down into flange, housing size, DLEZ series, shaft size and seal variant. To request a quote, send us the complete code exactly as it appears on the equipment.

These housings appear in belt and roller conveyors, packaging belts, mixers, blowers, exhausters, bucket elevators and process lines in food, chemical and aggregate processing. In Argentine plants they are found mounted on plates and profiles, with the shaft supported at the end or at intermediate sections. The 2-bolt flange solves the support when lateral space is limited and front fastening is preferable to a foot base.

To choose correctly, check the shaft diameter, expected radial and axial load, rotation speed and working environment. The SHCR seal protects against dust and splashes, but if there is frequent washdown or high humidity, it is advisable to reinforce lubrication and check the condition of the lips. During mounting, rest the flange on a flat, clean surface, tighten the bolts evenly and check shaft alignment before start-up. The self-alignment of the insert corrects minor deviations, not mounting errors.

Flange mounted bearings are interchangeable between manufacturers by code and dimensions: what matters is the shaft diameter, housing type, distance between holes and locking system. The same size can come with an insert locked by set screws, eccentric collar or tapered adapter, and that changes the mounting. Dimensional and functional equivalence is sought. Send us the code or a photo of the tag on WhatsApp and at MR Accesorios Industriales we will quote the housing.

If the housing works on critical equipment, have the complete code and service conditions on hand: load, speed and type of environment. With that data we will indicate the corresponding DLEZ variant and sealing options. Write to us on WhatsApp with the model you need and we will reply shortly.