Flange bearing 2 holes DODGE F2B-DLEZ-104S-PCR

DODGE F2B-DLEZ-104S-PCR is a flange bearing 2 holes reference, within Bearing housings. Request a quote for F2B-DLEZ-104S-PCR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 2-bolt flange bracket with DODGE DLEZ series insert bearing is a mounted unit that combines a cast iron housing with an insert ball bearing, ready to be fixed to a flat surface with two bolts. It is used to guide shafts in equipment where the mounting must sit flush with a wall or frame, with simple alignment and built-in lubrication. MR Accesorios Industriales distributes this line in Buenos Aires, Argentina.

The DLEZ series designation is read in blocks: the initial letters indicate the housing and insert type, and the numbers after the hyphen correspond to the shaft diameter. In the example F2B-DLEZ-104S-PCR, the prefix F2B identifies the two-bolt flange, DLEZ the insert bearing family, 104S the shaft diameter in inches and PCR the sealing type. With that complete part number the part is ordered without ambiguity.

These brackets are found in belt conveyors, bucket elevators, mixers, blowers and packaging lines. In food, chemical and aggregate processing plants in Argentina, the 2-bolt flange solves shafts that pass through plates or frames, where a pillow block does not fit. The casting supports the radial load and the insert absorbs small misalignments typical of the mounting.

To select, start from the shaft diameter and the load type: the ball insert covers moderate speed applications and continuous radial load. Check the sealing according to the environment: in the presence of dust or water, additional protection is advisable. When mounting, rest the flange on a clean, flat surface, tighten the two bolts in a cross pattern and verify that the shaft turns without effort. Lubrication comes from the factory; replenish it according to the duty cycle.

Regarding interchangeability, insert bearing brackets are selected by shaft dimensions, hole spacing and flange height, not only by brand. Between manufacturers there are format equivalences, but part numbers change and seals or locking systems do not always match. If you need to replace an existing unit, send the complete part number or the main dimensions and we will indicate the compatible alternative.

MR Accesorios Industriales distributes the DODGE line in Buenos Aires, Argentina, along with bearings, brackets and power transmission for industrial maintenance. If you have the part number F2B-DLEZ-104S-PCR or that of another size in the DLEZ series, send it by WhatsApp and we will quote it promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.