Radial shaft seal DBH 9915 — 30.00 x 47.00 x 7.25

DBH 9915 is a radial shaft seal reference, within Seals. Request a quote for 9915 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9915 radial shaft seal is a lip seal designed to prevent oil or grease leaks and the entry of contaminants in equipment with rotating shafts. With dimensions of 30.00 mm shaft, 47.00 mm housing and 7.25 mm height, and A 101 design, it is press-fitted into the cavity and works on the shaft. It is a wear part that is replaced during preventive or corrective maintenance.

This item is a DBH 9915 radial shaft seal, identified with the code 9915. Its dimensions are 30.00 mm for the shaft diameter (d), 47.00 mm for the housing diameter (D) and 7.25 mm height (h). The A 101 design corresponds to a specific construction configuration within the DBH line. The sealing lip, the metal body and the internal spring work together to maintain contact on the shaft and compensate for small misalignments.

It is used in gearboxes, pumps, electric motors, power transmission equipment and machinery in general where there is a rotating shaft that must be sealed. It is commonly found in applications with oil or grease lubrication, and in environments with dust or moisture that require an additional barrier. It is also used in agricultural, road and continuous process equipment, where the seal protects the bearings and prevents lubricant loss.

To install it, verify that the shaft and housing are clean, free of burrs or scratches, and lubricate the lip before installation. The seal must enter perpendicular and with uniform pressure, without hitting it directly on the lip. When selecting a replacement, in addition to the dimensions, take into account the type of fluid, the working temperature and the shaft speed. If the original seal shows irregular wear, check the condition of the shaft and housing.

If you need a nearby size or an equivalent, you can send us the code 9915 or the dimensions 30 x 47 x 7.25 mm and the A 101 design. It also helps if you send us a photo of the part and the intended use. At MR Accesorios Industriales we check the data against the manufacturer's product page to confirm the equivalence before quoting. If the exact size does not appear, we look for alternatives within the same oil seal category.

To move forward with the quote, send the code 9915 on WhatsApp to MR Accesorios Industriales. With the application data and the confirmed dimensions, we send you the commercial information and the quote for the part. If you have doubts about installation or selection, you can also ask us and we will advise you.