Product page
Radial shaft seal DBH 9888Vit — 44.45 x 66.57 x 12.0/23
- Manufacturer Part Number
- 9888Vit
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 9888Vit is a radial shaft seal reference, within Seals. Request a quote for 9888Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DBH 9888Vit radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its A 332 design and dimensions of 44.45 mm shaft, 66.57 mm housing and 12.0/23 mm height make it suitable for equipment where axial space is limited but reliable sealing is required. DBH is a brand that MR carries, with technical support to select the correct size.
This item is a radial shaft seal from the DBH line, identified by part number 9888Vit. Its main attributes are: shaft diameter 44.45 mm, housing diameter 66.57 mm and height 12.0/23 mm. The A 332 design corresponds to a configuration with a sealing lip and metal case, suitable for press fitting into cylindrical housings. The stepped height allows it to adapt to different housing depths.
Typical applications for this seal include gearboxes, pumps, electric motors, reducers and power transmission equipment in general. It is used to prevent oil or grease leaks and to stop the ingress of dust, water or particles that accelerate wear on bearings and shafts. It is a critical part in preventive maintenance of industrial machinery.
For installation, check that the shaft and housing are clean, free of burrs and scratches. Lubricate the seal lip with the same oil or grease used in the equipment before installing it. Insert the seal perpendicularly, without striking the lip, using a tube or socket of the appropriate diameter. Selection must consider shaft speed, operating temperature and the type of fluid to be retained.
If you need a seal with equivalent dimensions or a close variant, contact us with part number 9888Vit or with your shaft and housing dimensions. At MR Accesorios Industriales we can guide you to find the part compatible with your equipment. We also work with other brands and seal lines to cover different applications.
Remember that correct installation and periodic maintenance extend the service life of the seal. If you have doubts about compatibility with your machine, ask us. Send part number 9888Vit by WhatsApp to MR Accesorios Industriales and we will help you request a quote for the part you need.
Dimensions
- Shaft (d)
- 44.45mm
- Housing bore (D)
- 66.57mm
- Height (h)
- 12.0/23mm
- Design
- A 332
Frequently Asked Questions
- What are the dimensions of the DBH 9888Vit seal?
- The DBH 9888Vit seal has a shaft diameter of 44.45 mm, a housing diameter of 66.57 mm and a height of 12.0/23 mm. These dimensions correspond to its standard designation and allow it to be identified for replacement.
- What type of equipment is this seal suitable for?
- It is used in gearboxes, pumps, motors, reducers and rotating equipment that requires lubricant retention and contaminant exclusion. It is suitable for shafts with rotary motion and moderate operating conditions.
- How do I request a quote for the DBH 9888Vit seal?
- You can send part number 9888Vit by WhatsApp to MR Accesorios Industriales. You can also ask about equivalent dimensions or close variants. We will reply with the quote and the alternatives for your application.