Radial shaft seal DBH 9691 — 35.00 x 58.15 x 12.70

DBH 9691 is a radial shaft seal reference, within Seals. Request a quote for 9691 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9691 radial shaft seal is a lip seal that is mounted in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 35 mm shaft, 58.15 mm housing and 12.70 mm height place it in medium-sized transmission equipment and pumps. MR Accesorios Industriales offers it as part of its line of seals and oil seals for industrial maintenance.

This item is a DBH 9691 radial shaft seal with designation 9691. Its attributes indicate a shaft diameter of 35 mm, a housing diameter of 58.15 mm and a height of 12.70 mm. The Mx-Bidi design corresponds to a main lip with a bidirectional configuration, designed to contain lubricant in both directions of rotation. The DBH brand is an official brand that MR carries, so the replacement part is identified by its numeric part number and by these standardized dimensions.

Radial shaft seals in this section are used in gearboxes, centrifugal pumps, electric motors, conveyor rollers and power transmission equipment. In all these cases the function is the same: keep the oil or grease inside the assembly and prevent contaminants from entering that accelerate wear on bearings and gears. When the seal loses elasticity or the lip is damaged, lubricant leakage and dirt ingress appear, and replacement becomes necessary to protect the internal components.

To install a seal of these characteristics, check that the shaft has no burrs or deep marks in the contact area and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and place the seal perpendicular to the shaft, without striking it directly. Seal selection depends on rotation speed, working temperature and the type of fluid; if the equipment operates with high vibration or elevated temperature, it is advisable to evaluate a lip compound suited to that condition.

If you need an equivalent or a nearby size, the most practical thing is to send us part number 9691 or the set of dimensions 35 x 58.15 x 12.70 mm. It also helps if you indicate the equipment where it is installed, the brand of the original seal and a photo of the part. With that data we can look for an alternative from the same brand or from another firm that MR carries, respecting the shaft, housing and height dimensions. If the housing has a different diameter, a close size within the same seal category can be evaluated.

MR Accesorios Industriales distributes seals and oil seals for maintenance and repair of industrial equipment. If the DBH 9691 seal is the one you need, send the part number via WhatsApp and we will send you the quote. You can also ask about other sizes in the line or about seals for specific applications.